RoHS – Stainless Steel

Scope

The Waste Electrical and Electronic Equipment directive, commonly referred to as WEEE. This is aimed at electrical and electronic equipment manufacturers and has two main aims:

  1. Manufacturers will also have a responsibility for recycling products at the end of their life and there are targets manufacturers must meet.
  2. To eliminate the use of environmentally sensitive substances from the manufacturing process of electrical and electronic equipment. To do this, the WEEE directive refers to the Restriction of Hazardous Substances (RoHS) directive.

The main objective of the R0HS directive is to eliminate the use of four metals and 2 flame retardants – For each of these substances a maximum concentration value of 0.1% by weight in electrical and electronic equipment is permissible:

In addition, there is an extra clause covering the exceptions which includes Lead, when used as an alloying element where the maximum concentrationvalues are:

Statement

Our suppliers have confirmed that we do not have a problem in supplying material that fully conforms to the RoHS directive and as a Company we can thus make the following statement:

We can confirm that the levels of:

are all below the maximum permissible levels stipulated in the European Directive 2011/65/CE (Restriction of Hazardous Substances), for all materials supplied by us.

The only exception to this is where a customer orders a grade of material where the British, European or International Standard covering that grade requires the level of one or more of the substances to be in excess of the RoHS Directive. In this case, the material will contain a value of each substance in line with the requirements of the standard.

 

ابحث عن المنتج الذي تحتاجه

شبكة واسعة من مراكز الخدمة في الصين، مدعومة بمرافق معالجة قوية.

التوجيه باستخدام الحاسب الآلي الرقمي

إخلاء المسؤولية

هذه البيانات استرشادية فقط ولا يجب الاعتماد عليها بدلاً من المواصفات الكاملة. وعلى وجه الخصوص، تختلف متطلبات الخواص الميكانيكية اختلافًا كبيرًا باختلاف المزاج والمنتج وأبعاد المنتج. جميع المعلومات مبنية على معرفتنا الحالية ومقدمة بحسن نية. لن تتحمل الشركة أي مسؤولية فيما يتعلق بأي إجراء يتخذه أي طرف ثالث بالاعتماد عليها. يُرجى ملاحظة أن تاريخ ‘تحديث ورقة البيانات’ الموضح أعلاه لا يضمن الدقة أو ما إذا كانت ورقة البيانات محدثة أم لا.

تم استخلاص المعلومات الواردة في ورقة البيانات هذه من مصادر مختلفة معترف بها، بما في ذلك معايير EN ومراجع الصناعة المعترف بها (مطبوعة S عبر الإنترنت) وبيانات الشركات المصنعة. لا يوجد ضمان بأن المعلومات مستقاة من أحدث إصدار من تلك المصادر أو بشأن دقة تلك المصادر. قد تختلف المواد التي توفرها الشركة اختلافاً كبيراً عن هذه البيانات ولكنها تتوافق مع جميع المعايير ذات الصلة والمعمول بها. وبما أن المنتجات المفصلة قد تُستخدم في مجموعة متنوعة من الأغراض، وبما أن الشركة لا تتحكم في استخدامها؛ فإن الشركة تستثني على وجه التحديد جميع الشروط أو الضمانات الصريحة أو الضمنية الصريحة أو الضمنية بموجب القانون أو غير ذلك فيما يتعلق بالأبعاد، والخصائص و/أو الملاءمة لأي غرض معين، سواءً كانت صريحة أو ضمنية. تُقدَّم المشورة التي تقدمها الشركة لأي طرف ثالث من أجل مساعدة ذلك الطرف فقط وبدون مسؤولية من جانب الشركة. تخضع جميع المعاملات لشروط البيع الحالية للشركة. إن مدى التزامات الشركة تجاه أي عميل منصوص عليها بوضوح في تلك الشروط؛ وتتوفر نسخة منها عند الطلب.

إذا كانت لديك أي أسئلة، يُرجى الاتصال بنا، فنحن متواجدون على مدار 24 ساعة في اليوم