3003 O Sheet

Aluminium, Commercial Alloy

A general purpose alloy with moderate strength in the soft O condition.

DOWNLOAD PDF

Range

PLEASE NOTE

If you do not see what you are looking for, please contact your local service centre with your specific requirements.

3003 O Aluminium Related Specifications

System / Standard	Country / Region	Grade / Designation
AA	USA	3003-O
UNS	International	A93003 (3003-O)
EN / DIN	Europe	EN AW-3003-O / 3.0517
EN Name	Europe	AlMn1Cu-O
GB	China	3003-O
JIS	Japan	A3003-O
DIN	Germany	3.0517 (AlMn1Cu-O)
BS	UK	31000-O (equivalent to 3003-O)
AFNOR	France	A-M1-O

Properties

Chemical Composition

Alloy 3003

-                                        Chemical Element
+                                        % Present
-                                        Others (Total)
+.00 - 0.15
-                                        Cobalt (Co)
+.05 - 0.20
-                                        Hydrogen (H)
+.00 - 0.70
-                                        Magnesium (Mg)
+.00 - 1.50
-                                        Silicon + Iron (Si+Fe)
+.00 - 0.60
-                                        Zirconium (Zr)
+.00 - 0.10
-                                        Other (Each)
+.00 - 0.05
-                                        Aluminium (Al)
+                                        Balance

Mechanical Properties

Sheet 0.2mm to 6.00mm

-                                        Mechanical Property
+                                        Value
-                                        Tensile Strength
+- 135 MPa
-                                        Proof Stress
+Min MPa
-                                        Hardness Brinell
+HB

General Physical Properties

-                                        Physical Property
+                                        Value
-                                        Density
+.73 g/cm³
-                                        Melting Point
+°C
-                                        Thermal Expansion
+.1 x 10-6/K
-                                        Modulus of Elasticity
+.5 GPa
-                                        Thermal Conductivity
+W/m.K
-                                        Electrical Resistivity
+.034 x 10-6 Ω .m

Applications

Building industry: roofing and sidings, acoustic ceilings, corrugated sheets
Chemical and food industries: storage tanks, pipes, metal work
Equipment for heating and cooling: heat exchangers, air condition evaporators, motor vehicle radiators, freezer linings
Home appliances: cooking utensils, bakery moulds
Office equipment
Tube & Pipe
Packaging: containers, closures
Cladding alloy

Characteristics

Additional Information

Fabrication

-                                        Process
+                                        Rating
-                                        Workability - Cold
+                                        Very Good
-                                        Machinability
+                                        Acceptable
-                                        Weldability - Gas
+                                        Very Good
-                                        Weldability - Arc
+                                        Very Good
-                                        Weldability - Resistance
+                                        Good
-                                        Brazability
+                                        Very Good
-                                        Solderability
+                                        Very Good

Weldability

Range - Propeller Patterned Sheet

Sheet Size	Thicknesses
2500 x 1250	1.5mm - 3.0mm

Search for the product you need

An extensive network of service centers in China, supported by strong processing facilities.

Metals

Stainless Steel

Aluminium

Copper

Brass

Aluminium Bronze

Copper Nickel

Phosphor Bronze & Leaded Bronze

Nickel Alloys

Special Steels

Titanium

Machining Center

CNC Routing

Laser Cutting

Fabrication Services

Coil Shearing

Pressure Vessel

Special Finishes

DISCLAIMER

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon. Please note that the ‘Datasheet Update’ date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed S online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources. Material supplied by the Company may vary significantly from this data but will conform to all relevant and applicable standards. As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied. Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.