6082 O Sheet & Plate

Aluminium, Commercial Alloy

Structural aluminium alloy with the highest strength in the 6000 series.

Aluminium alloy 6082 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys and is known as a structural alloy. In plate form, 6082 is the alloy most commonly used for machining.

As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy.

Plate can be cut to customer requirements. Please ask your local Service Centre for further details.

DOWNLOAD PDF

Range

PLEASE NOTE

If you do not see what you are looking for, please contact your local service centre with your specific requirements.

6082 O Aluminium Related Specifications

System / Standard	Country / Region	Grade / Designation
AA	USA	6082-O
UNS	International	A96082 (6082-O)
EN / DIN	Europe	EN AW-6082-O / 3.2315
EN Name	Europe	AlSi1MgMn-O
GB	China	6082-O
BS	UK	6082-O (HE30-O, equivalent)

Properties

Chemical Composition

Alloy 6082

-                                        Chemical Element
+                                        % Present
-                                        Manganese (Mn)
+.40 - 1.00
-                                        Iron (Fe)
+.00 - 0.50
-                                        Magnesium (Mg)
+.60 - 1.20
-                                        Silicon (Si)
+.70 - 1.30
-                                        Copper (Cu)
+.00 - 0.10
-                                        Zinc (Zn)
+.00 - 0.20
-                                        Titanium (Ti)
+.00 - 0.10
-                                        Chromium (Cr)
+.00 - 0.25
-                                        Other (Each)
+.00 - 0.05
-                                        Others (Total)
+.00 - 0.15
-                                        Aluminium (Al)
+                                        Balance

Mechanical Properties

Sheet 0.4mm to 6.00mm

-                                        Mechanical Property
+                                        Value
-                                        Proof Stress
+Max MPa
-                                        Tensile Strength
+Max MPa
-                                        Hardness Brinell
+HB

General Physical Properties

-                                        Physical Property
+                                        Value
-                                        Density
+.70 g/cm³
-                                        Melting Point
+°C
-                                        Thermal Expansion
+x 10-6/K
-                                        Modulus of Elasticity
+GPa
-                                        Thermal Conductivity
+W/m.K
-                                        Electrical Resistivity
+.038 x 10-6 Ω .m

Applications

Highly stressed applications
Trusses
Bridges
Cranes
Transport applications
Ore skips
Beer barrels
Milk churns

Characteristics

Additional Information

Weldability

-                                        Process
+                                        Rating
-                                        Weldability - Gas
+                                        Good
-                                        Weldability - Arc
+                                        Good
-                                        Weldability - Resistance
+                                        Good
-                                        Brazability
+                                        Good
-                                        Solderability
+                                        Good

Fabrication

Process	Rating
Workability - Cold	Good
Machinability	Good

ຄົ້ນຫາຜະລິດຕະພັນທີ່ທ່ານຕ້ອງການ

ເຄືອຂ່າຍສູນບໍລິການທີ່ກວ້າງຂວາງໃນປະເທດຈີນ, ໂດຍໄດ້ຮັບການສະໜັບສະໜູນຈາກສະຖານທີ່ປຸງແຕ່ງທີ່ເຂັ້ມແຂງ.

ຄຳສຳຄັນທີ່ນິຍົມ

ໝວດໝູ່

ບໍ່ພົບບັນທຶກ

ເບິ່ງຜົນໄດ້ຮັບທັງໝົດ

ໂລຫະປະສົມອາລູມິນຽມທາງການຄ້າ

Metals

Stainless Steel

Aluminium

Copper

Brass

Aluminium Bronze

Copper Nickel

Phosphor Bronze & Leaded Bronze

ໂລຫະປະສົມນິກເກີນ

Special Steels

Titanium

Machining Center

CNC Routing

Laser Cutting

Fabrication Services

Coil Shearing

Pressure Vessel

Special Finishes

DISCLAIMER

This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon. Please note that the ‘Datasheet Update’ date shown above is no guarantee of accuracy or whether the datasheet is up to date.

The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed S online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources. Material supplied by the Company may vary significantly from this data but will conform to all relevant and applicable standards. As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied. Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.