55HX® is a high quality, high-performance aluminium for interior and exterior applications.
55HX® composition and surface quality ensure it is especially suitable for decorative anodisation, with a large array of processing options and finishes providing additional creative freedom. 55HX® allows architects to design the material in line with their individual needs. The easiness of its bending, perforating, punching and deep-drawing have made it an outstanding aluminium solution. After the anodizing aluminium substrate is weather, corrosion and UV-resistant while maintaining the authentic metallic gloss as well as the durability.
55HX® is ideal for facades, cladding, ceilings, walls and showcase designs and comes in a range of forms, sizes and gauges.
| Tamanho (mm) | Mill Finish with PCI | Anodised Natural(10 micron) | Anodised Natural(15 micron) |
| 2000 x 1000 x 1.0 | Verificado | Verificado | Verificado |
| 2000 x 1000 x 1.5 | Verificado | Verificado | Verificado |
| 2000 x 1000 x 2.0 | Verificado | Verificado | Verificado |
| 2000 x 1000 x 2.5 | Error | Verificado | Error |
| 2000 x 1000 x 3.0 | Verificado | Verificado | Verificado |
| 2000 x 1000 x 4.0 | Verificado | Error | Verificado Verificado |
| 2000 x 1000 x 5.0 | Verificado | Error | Error |
| 2500 x 1250 x 1.0 | Verificado | Verificado | Verificado |
| 2500 x 1250 x 2.0 | Verificado | Verificado | Verificado |
| 2500 x 1250 x 3.0 | Verificado | Verificado | Verificado |
| 3000 x 1250 x 2.0 | Verificado | Error | Verificado |
| 3000 x 1250 x 3.0 | Verificado | Error | Verificado |
| 3000 x 1500 x 1.0 | Verificado | Verificado | Verificado |
| 3000 x 1500 x 1.5 | Verificado | Verificado | Verificado |
| 3000 x 1500 x 2.0 | Verificado | Verificado | Verificado |
| 3000 x 1500 x 3.0 | Verificado | Verificado | Verificado |
| 3500 x 1500 x 3.0 | Verificado | Error | Error |
| 4000 x 1500 x 2.0 | Verificado | Error | Verificado |
| 4000 x 1500 x 3.0 | Verificado | Error | Verificado |
| Coil | Error | Error | Error |
| 1000 x 1.5mm | Verificado | Error | Error |
| 1250 x 1.5mm | Verificado | Error | Error |
| 1000 x 2.0mm | Verificado | Error | Error |
| 1250 x 2.0mm | Verificado | Error | Error |
| 1500 x 2.0mm | Verificado | Error | Error |
| 1250 x 2.5mm | Verificado | Error | Error |
| 1000 x 3.0mm | Verificado | Error | Error |
| 1250 x 3.0mm | Verificado | Error | Error |
| 1500 x 3.0mm | Verificado | Error | Error |
| In addition to a comprehensive range of familiar finishes and textures, 55HX®is suited to sublimation printing, a process where full colour graphics or photographs can be transferred direct to the material providing almost limitless creativity to designers and specifiers. | |||
| Alloy | EN Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Other Each | Total |
| 55HX® | 5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5-1.1 | 0.1 | 0.25 | - | 0.05 | 0.15 |
| (All data on wt. -%) | |||||||||||
| Alloy | Temper | Thickness(mm) | Tensile StrengthRm (MPa) | Yield StrengthRp0.2 (MPa) | ElongationA50 (%) |
| 55HX® | H14 | 0.2 ≤ 1.5 | 145 - 185 | min 120 | min 2 |
| 55HX® | H14 | 1.5 ≤ 3 | 145- 185 | min 120 | min 3 |
| 55HX® | H14 | 3 ≤ 5 | 145 -185 | min 120 | min 4 |
Loading and unloading of 55HX® should be done very carefully to avoid scratches and other surface defects.
55HX® should be ordered with paper or protective film on the visible side. The UV resistant film can be removed without residue, provided it was protected against water during storage at temperatures between 5°C and 30°C.
Processes such as laser cutting, punching, perforating and folding, should take place prior to anodizing. All processes influencing the surface quality must be avoided on the visible side. Therefore welding and soldering should only be done at the non visible side.
During wall cladding, all panels need to be put up in the same rolling direction. Thicknesses sizes < 2mm and ≥ 2mm should not be intermixed.
Once a year wash with water added with a neutral soft detergent. Afterwards, rinse with plain water and dry with a soft and absorbing cloth.
English English 
Español
Deutsch
Français
日本語
한국어
العربية
Português do Brasil
Italiano
Türkçe
Tiếng Việt
ไทย
Русский
O‘zbekcha
Bahasa Indonesia
ພາສາລາວ
বাংলা
Монгол
Se tiver alguma dúvida, entre em contato conosco, pois estamos on-line 24 horas por dia
