Alumínio, Liga Comercial
6101 T6 Bar & Extrusion
Uma liga de alumínio forjada tratável termicamente usada na fabricação e construção de componentes e equipamentos de distribuição de energia elétrica.
6101 is a heat treatable wrought alloy best suited for applications involving moderate strength and maximum electrical conductivity.
It is similar to alloy 6063, but with minor chemistry changes which enhance electrical conductivity. Although this alloy is primarily used for busbar conductor applications it is also an excellent choice for other electrical projects.
This alloy is available in various temper conditions. The wide variety of tempers provide different strengths, formability, and electrical conductivity levels which allows for design flexibility.
BAIXAR PDF
Faixa
ATENÇÃO
Se você não encontrar o que procura, entre em contato com seu centro de serviço local com seus requisitos específicos.
6101 T6 Aluminium Related Specifications
| Sistema / Padrão | País / Região | Grau / Designação |
| AA | EUA | 6101-T6 |
| UNS | Internacional | A96101 (6101-T6) |
| PT / DIN | Europa | EN AW-6101-T6 |
| Nome em Português | Europa | AlMgSi-T6 |
| GB | China | 6101-T6 |
| BS | Reino Unido | 6101-T6 (extruded conductor alloy) |
Propriedades
Composição Química
6101 T6
| Elemento Químico | % Presente |
| Cromo (Cr) | 0.00 - 0.03 |
| Cobre (Cu) | 0.00 - 0.10 |
| Ferro (Fe) | 0.00 - 0.50 |
| Magnésio (Mg) | 0.35 - 0.80 |
| Manganês (Mn) | 0.00 - 0.03 |
| Outro (Cada) | 0.00 - 0.03 |
| Outros (Total) | 0.00 - 0.10 |
| Silício (Si) | 0.30 - 0.70 |
| Zinco (Zn) | 0.00 - 0.10 |
Propriedades Mecânicas
| Propriedade Mecânica | Valor |
| Resistência à Tração | 97 MPa |
Propriedades Físicas Gerais
| Propriedade Física | Valor |
| Densidade | 2.7 g/cm³ |
| Ponto de Fusão | 588 °C |
Aplicativos
- Electrical busbar conductor applications for enclosed bus electrical installations
- Power transmissions
- Power stations
Características
- Good mechanical strength
- High electrical conductivity
- Good machinability
- Boa soldabilidade
- Good corrosion resistance
- Easily cold worked in aged or annealed conditions
Informações Adicionais
Soldabilidade
- Aluminum 6101 alloy can be welded using all standard welding methods. Inert gas arc welding method is the most preferred method for welding this alloy. The strength of the subsequent parts will be reduced when welded in the heat treated condition.
Tratamento Térmico
- Aluminum 6101 alloy does not react to heat treatment. However, heat treatment can be done by annealing and aging.
Laminação a Frio
- Aluminum 6101 alloy can be cold worked in the aged or annealed conditions.
Forming
- Aluminum 6101 alloy can be formed using conventional methods.