Alumínio, Liga Comercial
6106 T6 Extrusion
A heat treatable alloy with additions of copper, lead, silicon, magnesium and bismuth.
Aluminium alloy 6262 is a heat treatable alloy with very good corrosion resistance and strength. PLEASE NOTE: Due to European Environmental Protection Directives:
- 2000/53/CE-ELV – Para o setor automotivo
- 2002/95/CE-RoHS – Para o setor elétrico e eletrônico
This alloy has been replaced by Alloy 6026 which has a lower lead content.
BAIXAR PDF
Faixa
ATENÇÃO
Se você não encontrar o que procura, entre em contato com seu centro de serviço local com seus requisitos específicos.
6262 T6 Aluminium Related Specifications
| Sistema / Padrão | País / Região | Grau / Designação |
| AA | EUA | 6262-T6 |
| UNS | Internacional | A96262 (6262-T6) |
| PT / DIN | Europa | EN AW-6262-T6 |
| Nome em Português | Europa | AlMgSiPb (free-machining) – T6 |
| GB | China | 6262-T6 |
| BS | Reino Unido | 6262-T6 (extruded free-machining bar) |
Propriedades
Composição Química
Alloy 6262
| Elemento Químico | % Presente |
| Manganês (Mn) | 0.00 - 0.15 |
| Ferro (Fe) | 0.00 - 0.70 |
| Magnésio (Mg) | 0.80 - 1.20 |
| Silício (Si) | 0.40 - 0.80 |
| Zinco (Zn) | 0.00 - 0.25 |
| Titânio (Ti) | 0.00 - 0.15 |
| Cromo (Cr) | 0.04 - 0.14 |
| Cobre (Cu) | 0.15 - 1.40 |
| Bismuto (Bi) | 0.40 - 0.70 |
| Chumbo (Pb) | 0.40 - 0.70 |
| Outro (Cada) | 0.00 - 0.05 |
| Outros (Total) | 0.00 - 0.15 |
| Alumínio (Al) | Equilíbrio |
Propriedades Mecânicas
Rod & Bar Up to 200mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 240 MPa |
| Resistência à Tração | 260 Min MPa |
| Alongamento A50 mm | 8 Min % |
| Dureza Brinell | 75 HB |
| Alongamento A | 10 Min % |
Tube Up to 25mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 240 MPa |
| Resistência à Tração | 260 Min MPa |
| Alongamento A50 mm | 8 Min % |
| Dureza Brinell | 75 HB |
| Alongamento A | 10 Min % |
Profiles Up to 25mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 240 MPa |
| Resistência à Tração | 260 Min MPa |
| Alongamento A50 mm | 8 Min % |
| Dureza Brinell | 75 HB |
| Alongamento A | 10 Min % |
Propriedades Físicas Gerais
| Propriedade Física | Valor |
| Densidade | 2.71 g/cm³ |
| Ponto de Fusão | 582 °C |
| Expansão Térmica | 23,4 x 10⁻⁶/K |
| Módulo de Elasticidade | 68.3 GPa |
| Condutividade Térmica | 172 W/m.K |
| Resistividade elétrica | 0.039 x 10-6 Ω .m |
Aplicativos
- Screw machine products
- Camera parts
- Nuts
- Couplings
- Marine fittings
- Decorative hardware and appliance fittings
- Hinge pins
- Oil line fittings
- Valves and valve parts
Características
- Very good corrosion resistance
- Very good strength
- Excellent machinability and surface finish due to additions of bismuth
- High-speed steel or carbide tooling can be used to obtain smooth finishes. Heavy cutting requires oil lubricant but light cutting can be done dry
- Alloy 6262 can be used in place of 2011 when higher corrosion resistance and better anodising response is required
Informações Adicionais
Soldabilidade
Alloy 6262 is readily weldable by all commercial methods and can also be brazed.
| Processo | Avaliação |
| Soldabilidade - Gás | Excelente |
| Soldabilidade - Arco | Excelente |
| Soldabilidade - Resistência | Excelente |
| Braziliabilidade | Excelente |
Fabricação
| Processo | Avaliação |
| Trabalhabilidade - Frio | Poor |
| Usinabilidade | Excelente |