Aluminium, ASTM & FED-QQ
QQ-A-200/8 T6511 (6061)
Aerospace aluminium alloy with good strength and workability.
A medium strength aerospace aluminium alloy with, depending upon temper, yield strength of 12-35 ksi (80-240 MPa) and tensile strength of 26-38 ksi (180-260 MPa).
This alloy is used where good strength combined with workability is required.
ดาวน์โหลด PDF
ช่วง
PLEASE NOTE
If you do not see what you are looking for, please contact your local service centre with your specific requirements.
QQ-A-200/8 T6511 Aluminium Related Specifications
| System / Standard | Country / Region | Grade / Designation |
| AA | USA | 6061-T6511 |
| UNS | International | A96061 (6061-T6511) |
| EN / DIN | Europe | EN AW-6061-T6511 |
| EN Name | Europe | AlMg1SiCu-T6511 |
| ASTM B221 | USA | 6061-T6511 extruded bar, rod, shapes & tube |
| GB | China | 6061-T6511 |
| JIS | Japan | A6061-T6511 |
| BS | UK | 6061-T6511 (extruded profiles) |
Properties
Chemical Composition
Alloy QQ A 200/8
SAE AMS QQ-A-200/8
| Chemical Element | % Present |
| Silicon (Si) | 0.40 - 0.80 |
| Iron (Fe) | 0.00 - 0.70 |
| Copper (Cu) | 0.15 - 0.40 |
| Manganese (Mn) | 0.00 - 0.15 |
| Chromium (Cr) | 0.04 - 0.35 |
| Magnesium (Mg) | 0.80 - 1.20 |
| Zinc (Zn) | 0.00 - 0.25 |
| Titanium (Ti) | 0.00 - 0.15 |
| Other (Each) | 0.00 - 0.05 |
| Others (Total) | 0.00 - 0.15 |
| Aluminium (Al) | Balance |
General Physical Properties
| Physical Property | Value |
| Density | 2.70 g/cm³ |
| Melting Point | 147631 °C |
| Thermal Expansion | 23.4 x 10-6/K |
| Modulus of Elasticity | 70 GPa |
| Thermal Conductivity | 166 W/m.K |
| Electrical Resistivity | 0.040 x 10-6 Ω .m |
การประยุกต์ใช้
- High technology applications
- Defence components
- Aerospace components
Characteristics
- Very good machinability
- Good resistance to corrosive atmospheric attack
- Weldability is very good by inert gas, resistance and spot welding
Additional Information
Mechanical Properties
These mechanical properties are for bar in the T6511 temper.
| Diameter (mm) | Proof Strength (Min) | Tensile Strength (Min) | Elongation % (Min) |
| Up to & incl. 6.3 | 241 | 262 | 8 |
| Over 6.3 | 241 | 262 | 10 |
