Aluminium, ASTM & FED-QQ
QQ-A-200/3 T3511 (2024) Bar & Extrusion
High strength aerospace aluminium alloy.
A high strength alloy with, dependent upon temper, minimum proof stress up to 56 ksi/385 MPa and minimum tensile strength up to 70 ksi/482 MPa.
It is excellent on parts where good strength-to-weight ratio is needed and for use in high strength applications where no welding is required.
PDF İNDİR
Menzil
LÜTFEN DİKKAT
Aradığınız şeyi göremiyorsanız, lütfen yerel servis merkezi özel gereksinimlerinizle.
QQ-A-200/3 T3511 Aluminium Related Specifications
| Sistem / Standart | Ülke / Bölge | Sınıf / Görevlendirme |
| AA | ABD | 2024-T3511 |
| UNS | Uluslararası | A92024 (2024-T3511) |
| EN / DIN | Avrupa | EN AW-2024-T3511 / 3.1355 |
| EN Adı | Avrupa | AlCu4Mg1-T3511 |
| ASTM B221 | ABD | 2024-T3511 extruded bar, rod, shapes & tube |
| GB | Çin | 2A12-T3511 (commonly used equivalent to 2024-T3511) |
| JIS | Japan | A2024-T3511 |
| BS (Aerospace) | BIRLEŞIK KRALLIK | 2024A-T3511 extruded products (L-series aerospace) |
Özellikler
Kimyasal Bileşim
Alloy QQ-A-200/3
SAE AMS QQ-A-200/3
| Kimyasal Element | % Mevcut |
| Silisyum (Si) | 0.00 - 0.50 |
| Demir (Fe) | 0.00 - 0.50 |
| Bakır (Cu) | 3.80 - 4.90 |
| Manganez (Mn) | 0.30 - 0.90 |
| Krom (Cr) | 0.00 - 0.10 |
| Magnezyum (Mg) | 1.20 - 1.80 |
| Çinko (Zn) | 0.00 - 0.25 |
| Titanyum (Ti) | 0.00 - 0.15 |
| Diğer (Her biri) | 0.00 - 0.05 |
| Diğerleri (Toplam) | 0.00 - 0.15 |
| Alüminyum (Al) | Denge |
Genel Fiziksel Özellikler
| Fiziksel Özellikler | Değer |
| Yoğunluk | 2.74 g/cm³ |
| Erime Noktası | 640 °C |
| Termal Genleşme | 23.1 x 10-6/K |
| Elastisite Modülü | 73 GPa |
| Termal İletkenlik | 121 W/m.K |
| Elektriksel Dirençlilik | 30 % IACS |
Uygulamalar
- Commonly used in:
- Aircraft structural components
- Truck wheels
- Medical instruments
- Screw machine products
Özellikler
- High strength
- Very good machinability
- Very good weldability
- Improved stress corrosion cracking resistance
- Excellent fatigue resistance
Ek Bilgi
Mekanik Özellikler
These apply to QQ-A-200/3 bar in the T3 temper.
| Diameter (mm) | Proof Strength (Min) | Tensile Strength (Min) | Elongation % (Min) |
| Up to & incl. 6.25mm | 290 | 393 | 12 |
| Over 6.3mm up to & incl. 19mm | 303 | 414 | 12 |
| Over 19mm up to & incl. 38mm | 317 | 448 | 10 |
| Over 38mm | 358 | 483 | 10 |