Aluminium, ASTM & FED-QQ
QQ-A-225/8 T651 (6061) Bar & Extrusion
Medium strength aerospace aluminium alloy.
A widely used aerospace aluminium alloy of medium strength. Depending upon the specific temper, QQ-A-225/8 can have a tensile strength of 290 MPa (42 ksi) and yield strength up to 240 MPa (35 ksi).
This alloy is suitable for a range of applications where strength is needed while still allowing good weldability and workability. Like all aluminium alloys, QQ-A-225/8 T651 has exceptional resistance to corrosion.
PDF İNDİR
Menzil
LÜTFEN DİKKAT
Aradığınız şeyi göremiyorsanız, lütfen yerel servis merkezi özel gereksinimlerinizle.
QQ-A-225/8 T651 Aluminium Related Specifications
| Sistem / Standart | Ülke / Bölge | Sınıf / Görevlendirme |
| AA | ABD | 6061-T651 |
| UNS | Uluslararası | A96061 (6061-T651) |
| EN / DIN | Avrupa | EN AW-6061-T651 |
| EN Adı | Avrupa | AlMg1SiCu-T651 |
| ASTM B211 | ABD | 6061-T651 bar, rod & wire |
| GB | Çin | 6061-T651 |
| JIS | Japan | A6061-T651 |
| BS | BIRLEŞIK KRALLIK | 6061-T651 (extruded profiles / wrought bar) |
Özellikler
Kimyasal Bileşim
Alloy QQ A 225/8
SAE AMS QQ-A-225/8
| Kimyasal Element | % Mevcut |
| Silisyum (Si) | 0.40 - 0.80 |
| Demir (Fe) | 0.00 - 0.70 |
| Bakır (Cu) | 0.15 - 0.40 |
| Manganez (Mn) | 0.00 - 0.15 |
| Krom (Cr) | 0.04 - 0.35 |
| Magnezyum (Mg) | 0.80 - 1.20 |
| Çinko (Zn) | 0.00 - 0.25 |
| Titanyum (Ti) | 0.00 - 0.15 |
| Diğer (Her biri) | 0.00 - 0.05 |
| Diğerleri (Toplam) | 0.00 - 0.15 |
| Alüminyum (Al) | Denge |
Mekanik Özellikler
Bar 12.7mm to 203.2mm
SAE AMS QQ-A-225/8
| Mekanik Mülkiyet | Değer |
| Kanıt Stres | 241 Min MPa |
| Çekme Dayanımı | 290 Min MPa |
| Elongation A50 mm | 10 Min % |
Genel Fiziksel Özellikler
| Fiziksel Özellikler | Değer |
| Yoğunluk | 2.70 g/cm³ |
| Erime Noktası | 650 °C |
| Termal Genleşme | 23.4 x 10-6/K |
| Elastisite Modülü | 70 GPa |
| Termal İletkenlik | 166 W/m.K |
| Elektriksel Dirençlilik | 0.040 x 10-6 Ω .m |
Uygulamalar
- High technology applications
- Defence components
- Aerospace components
Özellikler
- Very good machinability
- Excellent when welding using resistance, spot and beam methods. Other welding methods are not recommended
- Corrosion resistance to atmospheric attack is poor