Alüminyum, Ticari Alaşım
6101 T6 Bar & Extrusion
A heat treatable wrought aluminium alloy used in the manufacture and construction of electrical power distribution components and equipment.
6101 is a heat treatable wrought alloy best suited for applications involving moderate strength and maximum electrical conductivity.
It is similar to alloy 6063, but with minor chemistry changes which enhance electrical conductivity. Although this alloy is primarily used for busbar conductor applications it is also an excellent choice for other electrical projects.
This alloy is available in various temper conditions. The wide variety of tempers provide different strengths, formability, and electrical conductivity levels which allows for design flexibility.
PDF İNDİR
Menzil
LÜTFEN DİKKAT
Aradığınız şeyi göremiyorsanız, lütfen yerel servis merkezi özel gereksinimlerinizle.
6101 T6 Aluminium Related Specifications
| Sistem / Standart | Ülke / Bölge | Sınıf / Görevlendirme |
| AA | ABD | 6101-T6 |
| UNS | Uluslararası | A96101 (6101-T6) |
| EN / DIN | Avrupa | EN AW-6101-T6 |
| EN Adı | Avrupa | AlMgSi-T6 |
| GB | Çin | 6101-T6 |
| BS | BIRLEŞIK KRALLIK | 6101-T6 (extruded conductor alloy) |
Özellikler
Kimyasal Bileşim
6101 T6
| Kimyasal Element | % Mevcut |
| Krom (Cr) | 0.00 - 0.03 |
| Bakır (Cu) | 0.00 - 0.10 |
| Demir (Fe) | 0.00 - 0.50 |
| Magnezyum (Mg) | 0.35 - 0.80 |
| Manganez (Mn) | 0.00 - 0.03 |
| Diğer (Her biri) | 0.00 - 0.03 |
| Diğerleri (Toplam) | 0.00 - 0.10 |
| Silisyum (Si) | 0.30 - 0.70 |
| Çinko (Zn) | 0.00 - 0.10 |
Mekanik Özellikler
| Mekanik Mülkiyet | Değer |
| Çekme Dayanımı | 97 MPa |
Genel Fiziksel Özellikler
| Fiziksel Özellikler | Değer |
| Yoğunluk | 2.7 g/cm³ |
| Erime Noktası | 588 °C |
Uygulamalar
- Electrical busbar conductor applications for enclosed bus electrical installations
- Power transmissions
- Power stations
Özellikler
- Good mechanical strength
- High electrical conductivity
- Good machinability
- Good weldability
- Good corrosion resistance
- Easily cold worked in aged or annealed conditions
Ek Bilgi
Kaynaklanabilirlik
- Aluminum 6101 alloy can be welded using all standard welding methods. Inert gas arc welding method is the most preferred method for welding this alloy. The strength of the subsequent parts will be reduced when welded in the heat treated condition.
Heat Treatment
- Aluminum 6101 alloy does not react to heat treatment. However, heat treatment can be done by annealing and aging.
Cold Working
- Aluminum 6101 alloy can be cold worked in the aged or annealed conditions.
Forming
- Aluminum 6101 alloy can be formed using conventional methods.
