Aluminium, Commercial Alloy
Aluminium Alloy 6063 T6 Bar & Extrusion
One of the most popular alloys in the 6000 series and most widely known as an architectural alloy.
Aluminium alloy 6063 is a medium strength alloy commonly referred to as an architectural alloy. It is normally used in intricate extrusions and is most commonly supplied in the T6 temper.
تنزيل ملف PDF
النطاق
| Product Form | Size Range | Size Range |
| From | To | |
| Flat Bar | 3⁄8" x 1⁄8" | 6" x 1" |
| Square Box Section | 1⁄2" x 1⁄2" x 16swg | 4" x 4" x 1⁄4" |
| Rectangular Box Section | 1" x 1⁄2" x 16swg | 6" x 3" x 3⁄8" |
| Tube | 3⁄8" OD x 16swg | 6 1⁄2" OD x 1⁄4" |
| Channel | 3⁄8" x 3⁄8" x 1⁄16" | 10" x 3" x 3⁄8" x 1⁄2" |
| Equal Angle | 3⁄8" x 3⁄8" x 1⁄16" | 6" x 6" x 1⁄2" |
| Unequal Angle | 3⁄4" x 1⁄4" x 1⁄16" | 6" x 3" x 3⁄8" |
| Angle (Metric) | 25 x 25 x 3mm, 50 x 25 x 3mm, 50 x 50 x 3mm | - |
| Z Section | 3⁄4" x 1⁄2" x 1⁄16" | 1 3⁄4" x 1" x 1⁄8" |
يرجى الملاحظة
إذا لم تجد ما تبحث عنه، يُرجى الاتصال ب مركز الخدمة المحلي بمتطلباتك الخاصة.
6063 T6 Aluminium Related Specifications
| النظام/المعيار | البلد/المنطقة | الدرجة/التعيين |
| AA | الولايات المتحدة الأمريكية | 6063-T6 |
| UNS | الدولية | A96063 (6063-T6) |
| EN / DIN | أوروبا | EN AW-6063-T6 / 3.32206 |
| اسم EN | أوروبا | AlMg0.7Si-T6 |
| GB | الصين | 6063-T6 |
| JIS | اليابان | A6063-T6 |
| ب | المملكة المتحدة | 6063-T6 (extruded profiles) |
الخصائص
التركيب الكيميائي
Alloy 6063
| العنصر الكيميائي | % الحاضر |
| المنجنيز (Mn) | 0.00 - 0.10 |
| الحديد (Fe) | 0.00 - 0.35 |
| Magnesium (Mg) | 0.45 - 0.90 |
| السيليكون (Si) | 0.20 - 0.60 |
| Zinc (Zn) | 0.00 - 0.10 |
| Titanium (Ti) | 0.00 - 0.10 |
| الكروم (Cr) | 0.00 - 0.10 |
| Copper (Cu) | 0.00 - 0.10 |
| Other (Each) | 0.00 - 0.05 |
| Others (Total) | 0.00 - 0.15 |
| Aluminium (Al) | الرصيد |
الخواص الميكانيكية
Rod & Bar Up To 150mm Dia. & A/F
| الممتلكات الميكانيكية | القيمة |
| إجهاد الإثبات | 170 Min MPa |
| قوة الشد | 215 Min MPa |
| Hardness Brinell | 75 HB |
| Elongation A | 10 Min % |
| الاستطالة A50 مم | 8 Min % |
Rod & Bar 150mm to 200mm Dia. & A/F
| الممتلكات الميكانيكية | القيمة |
| إجهاد الإثبات | 160 Min MPa |
| قوة الشد | 195 Min MPa |
| Hardness Brinell | 75 HB |
| Elongation A | 10 Min % |
Tube Up To 25mm Wall Thickness
| الممتلكات الميكانيكية | القيمة |
| إجهاد الإثبات | 170 Min MPa |
| قوة الشد | 215 Min MPa |
| الاستطالة A50 مم | 8 Min % |
| Hardness Brinell | 75 HB |
| Elongation A | 10 Min % |
Profiles Up to 10mm Wall Thickness
| الممتلكات الميكانيكية | القيمة |
| إجهاد الإثبات | 170 Min MPa |
| قوة الشد | 215 Min MPa |
| الاستطالة A50 مم | 6 Min % |
| Hardness Brinell | 75 HB |
| Elongation A | 8 Min % |
Profiles 10mm to 25mm Wall Thickness
| الممتلكات الميكانيكية | القيمة |
| إجهاد الإثبات | 160 Min MPa |
| قوة الشد | 195 Min MPa |
| الاستطالة A50 مم | 6 Min % |
| Hardness Brinell | 75 HB |
| Elongation A | 8 Min % |
الخصائص الفيزيائية العامة
| Process | Rating |
| Weldability - Gas | Good |
| Weldability - Arc | Very Good |
| Weldability - Resistance | Good |
| Brazability | Very Good |
| Solderability | Good |
التطبيقات
- Extrusions
- Window frames
- Doors
- Shop fittings
- Irrigation tubing
- In balustrading the rails and posts are normally in the T6 temper and formed elbows and bends are T4
- Hydro formed tube for chassis
Characteristics
- High corrosion resistance
- Medium strength
- Good surface finish
- Readily suited to welding
- Easily anodised
- Good formability in the T4 condition
معلومات إضافية
قابلية اللحام
- 6063 is suitable for all conventional welding methods.
- Welding wire generally should be alloy 5183 or alloy 4043.
- When maximum electrical conductivity is required use alloy 4043.
- For strength and conductivity use alloy 5346 and increase the size of the weld to compensate for the lower conductivity.
| Process | Rating |
| Weldability - Gas | Good |
| Weldability - Arc | Very Good |
| Weldability - Resistance | Good |
| Brazability | Very Good |
| Solderability | Good |
التصنيع
| Process | Rating |
| Workability - Cold | Average (Acceptable) |
| قابلية التصنيع | Good |