Aluminium, BS-L
L111 Aluminium Alloy Bar & Extrusion T6511
Heat treatable aerospace aluminium alloy with very good corrosion resistance and weldability.
L111 is a medium strength extruded bar with an alloy strength somewhat higher than alloy 6061. It is not suitable for complex sections.
تنزيل ملف PDF
النطاق
يرجى الملاحظة
إذا لم تجد ما تبحث عنه، يُرجى الاتصال ب مركز الخدمة المحلي بمتطلباتك الخاصة.
L111 T6511 Aluminium Related Specifications
| النظام/المعيار | البلد/المنطقة | Grade / Designation / Note |
| أأ | الولايات المتحدة الأمريكية | No single official AA number; L111-T6511 is a BS aerospace code |
| UNS | الدولية | No specific UNS assigned; depends on the alloy defined in the spec |
| EN / DIN | أوروبا | No unique EN AW mapping; refer to the BS L111 material specification |
| GB (BS Aerospace) | United Kingdom | L111-T6511 – aluminium alloy extruded bars/sections, T6511 temper |
| JIS | اليابان | No direct JIS equivalent published |
| أفنور | فرنسا | No direct AFNOR equivalent published |
الخصائص
التركيب الكيميائي
Alloy L111
BS L111 (1971)
| العنصر الكيميائي | % الحاضر |
| المنجنيز (Mn) | 0.40 - 1.00 |
| السيليكون (Si) | 0.70 - 1.30 |
| المغنيسيوم (Mg) | 0.50 - 1.20 |
| نحاس (Cu) | 0.00 - 0.10 |
| الحديد (Fe) | 0.00 - 0.50 |
| Tin (Sn) | 0.00 - 0.05 |
| الكروم (Cr) | 0.00 - 0.25 |
| النيكل (ني) | 0.00 - 0.10 |
| Lead (Pb) | 0.00 - 0.05 |
| التيتانيوم (Ti) | 0.00 - 0.20 |
| الزنك (Zn) | 0.00 - 0.20 |
| الألومنيوم (Al) | الرصيد |
الخواص الميكانيكية
Alloy L111 - Mechanical Properties T6511 Temper for Various Dimensions
BS L111 (1971)
| الممتلكات الميكانيكية | القيمة |
| >20mm Proof Strength | 255 Min |
| >20mm Tensile Strength | 295 Min |
| >20mm Elongation | 7% min |
| 20mm - 150mm Proof Stress | 270 min |
| 20mm - 150mm Tensile Strength | 310 Min |
| 20mm - 150mm Elongation | 8% min |
| 150mm - 200mm Proof Stress | 240 Min |
| 150mm - 200mm Tensile Strength | 280 Min |
| 150mm - 200mm Elongation | 5% Min |
الخصائص الفيزيائية العامة
Alloy L111
BS L111 (1971)
| الممتلكات المادية | القيمة |
| الكثافة | 2710 g/cm³ |
| نقطة الانصهار | 650 °C |
| التمدد الحراري | 23.10 x 10-6/K |
| معامل المرونة | 70000 GPa |
| الموصلية الحرارية | 167-216 W/m.K |
التطبيقات
- Aerospace components
- High technology applications
خصائص
- Very good corrosion resistance
- Very good weldability (lowered strength values in the weld zone)
- Good machinability
- Good cold formability in T4 temper after a stabilizing heat treatment.
- Heat treatable medium high strength construction
- Medium high fatigue strength