ຂໍໃບສະເໜີລາຄາ
ບ້ານ ໂລຫະ ອາລູມິນຽມ Archive by category "PRE ANODISED ALUMINIUM"

ອາລູມິນຽມອະໂນໄດซ์ລ່ວງໜ້າ

For applications where aesthetics, durability and distinctive interior décor is required.

Pre-anodised aluminium is not just limited to interior design as it provides excellent opportunities for cladding, roof finishes and trims and has been used widely in both commercial and domestic architectural and design applications throughout the world.

TALK TO AN EXPERT

ຄົ້ນຫາຜະລິດຕະພັນທີ່ທ່ານຕ້ອງການ

ເຄືອຂ່າຍສູນບໍລິການທີ່ກວ້າງຂວາງໃນປະເທດຈີນ, ໂດຍໄດ້ຮັບການສະໜັບສະໜູນຈາກສະຖານທີ່ປຸງແຕ່ງທີ່ເຂັ້ມແຂງ.

ຄຳສຳຄັນທີ່ນິຍົມ

ໝວດໝູ່

ບໍ່ພົບບັນທຶກ

ເບິ່ງຜົນໄດ້ຮັບທັງໝົດ
  • ຜູ້ຊ່ຽວຊານດ້ານຜະລິດຕະພັນຫຼາຍປະເພດທີ່ມີປະສົບການ
  • ໂຮງງານຜະລິດພາຍໃນທີ່ທັນສະໄໝ
  • Large number of export transport ships

Alumaplus

Alumaplus is a stainless steel look-alike with one-third of the weight of stainless steel. It has greater fingerprint resistance, forms to tighter tolerances and has higher formability than stainless steel. These attributes make Alumaplus an ideal alternative in many architectural and surface design applications, such as kitchens, washrooms, reception areas, point of display and medical display areas.

 

Applications

  • Ceiling systems
  • Panelling
  • Partitions
  • Framing
  • Work surfaces
  • Cladding
  • Roof finishes & trims

Mild Steel Backing 'Plate' Flanges

  • Zh Metal Materia'l have available from stock, a wide range of colours and finishes from bright to special finishes, including patterned and coloured anodised coil.
  • We can supply material slit and cut to length to bespoke sizes specified by the customer.

Pre Anodised Sheet

Size (mm) 5005 AQ 1050 AQ H12
2500 x 1250 x 1.5 Checked Checked
2500 x 1250 x 2.0 Checked Checked
2500 x 1250 x 3.0 Checked Checked

ຄົ້ນຫາຜະລິດຕະພັນທີ່ທ່ານຕ້ອງການ

ເຄືອຂ່າຍສູນບໍລິການທີ່ກວ້າງຂວາງໃນປະເທດຈີນ, ໂດຍໄດ້ຮັບການສະໜັບສະໜູນຈາກສະຖານທີ່ປຸງແຕ່ງທີ່ເຂັ້ມແຂງ.

ຄຳສຳຄັນທີ່ນິຍົມ

ໝວດໝູ່

ບໍ່ພົບບັນທຶກ

ເບິ່ງຜົນໄດ້ຮັບທັງໝົດ
  • ຜູ້ຊ່ຽວຊານດ້ານຜະລິດຕະພັນຫຼາຍປະເພດທີ່ມີປະສົບການ
  • ໂຮງງານຜະລິດພາຍໃນທີ່ທັນສະໄໝ
  • Large number of export transport ships

Metals

Stainless Steel
Stainless steel side navigation
PRODUCT OVERVIEW
Aluminum alloy side navigation
PRODUCT OVERVIEW
Brass side navigation
PRODUCT OVERVIEW
Copper Edge Navigation
PRODUCT OVERVIEW
ອາລູມິນຽມທອງແດງ 1
PRODUCT OVERVIEW
Copper-nickel alloy side navigation
PRODUCT OVERVIEW
ທອງແດງຟອສຟໍຣັດ ແລະ ທອງແດງຕະກົ່ວ 1
PRODUCT OVERVIEW
Nickel Alloys Metals
PRODUCT OVERVIEW
AMS 6425 (HY-TUF)
PRODUCT OVERVIEW
ໂລຫະປະສົມໄທທານຽມ
PRODUCT OVERVIEW

Machining Center

CNC Routing
Stainless Steel Cnc Routing
FING OUT MORE
Laser cutting processing
FING OUT MORE
FABRICATION SERVICES (1)
FING OUT MORE
COIL SHEARING (1)
FING OUT MORE
Stainless steel high pressure tank
FING OUT MORE
ແຜ່ນຕົກແຕ່ງສະແຕນເລດ
FING OUT MORE

General Information for Aluminium

Aerospace Aluminium Alloy Grades

Aluminium is ideal for aircraft manufacture because it is lightweight, rigid, strong and corrosion resistant.

Cleaning & Handling Aluminium

Aluminium materials are characterised by their lightness, strength, corrosion resistance, high durability and

CN Standards for Aluminium Extrusions

General engineering → check GB/T 6892 + GB/T 3190 (for alloy chemistry).

CN Standards For Rolled Aluminium

Differences Between BS & CN Standards

Fabrication of Aluminium

Aluminium alloys are normally supplied as semi- finished

Temper Designations for Aluminium

Aluminium alloys are supplied in a very wide range of tempers with two principal groups.

RoHS Aluminium Products

Material Safety of Aluminium

Consideration of health and safety issues is important when customers are processing or using aluminium and

REACH Aluminium

EC Regulation 1907/2006 Concerning the Registration, Evaluation, Authorisation and Restriction of

Aluminium Alloy Specifications

There are over 300 wrought alloys with 50 in common use. They are normally identified by a four figure

ສົ່ງຂໍ້ຄວາມຫາພວກເຮົາ

ຖ້າທ່ານມີຄໍາຖາມໃດໆກະລຸນາຕິດຕໍ່ຫາພວກເຮົາ, ພວກເຮົາອອນໄລນ໌ 24 ຊົ່ວໂມງຕໍ່ມື້