Rolled edge flat bar is supplied to the following tolerances.
The information is taken from BS CN 10058.
Special tolerances may be available upon request for production orders.
Tolerances
Зузаан хэмжээний тэсвэр
| Nominal Thickness (mm) | Тэсвэр (мм) +/- |
| ≤20 | 0.50 |
| >20 ≤ 40 | 1.00 |
| >40 ≤ 60 | 1.50 |
Өргөний тэсвэр
| Nominal Width (mm) | Тэсвэр (мм) +/- |
| 10 ≤ 40 | 0.75 |
| >40 ≤ 80 | 1.00 |
| >80 ≤ 100 | 1.50 |
| >100 ≤ 120 | 2.00 |
| >120 ≤ 150 | 2.50 |
Straightness Tolerances
| Nominal Cross Section (mm2) | Тэсвэр (мм) |
| Below 1000 | Below 0.4% of measuring length |
| 1000 and Above | Below 0.25% of measuring length |
Out of Section Tolerances
| Nominal Thickness (mm) | Тэсвэр (мм) |
| 10 ≤ 25 | 0.50 |
| >25 ≤ 40 | 1.00 |
| >40 ≤ 80 | 1.50 |
