Alumínio, Liga Comercial
6005A T6 Bar & Extrusion
A medium strength, heat treatable alloy with excellent corrosion resistance.
Aluminium alloy 6005A is a medium strength, heat treatable alloy with excellent corrosion resistance. It is often used in transport and structural engineering applications.
Alloy 6005 has properties between those of alloys 6061 and 6082 and can sometimes be used interchangeably with these alloys, but 6005 has better extrusion characteristics and a better mill surface finish. It is difficult to produce thin-wall or complicated extrusions in 6005, but it is still more extrudable than 6082.
BAIXAR PDF
Faixa
ATENÇÃO
Se você não encontrar o que procura, entre em contato com seu centro de serviço local com seus requisitos específicos.
6005A T6 Aluminium Related Specifications
| Sistema / Padrão | País / Região | Grau / Designação |
| AA | EUA | 6005A-T6 |
| PT / DIN | Europa | EN AW-6005A-T6 |
| Nome em Português | Europa | AlSiMg(A)-T6 |
| GB | China | 6005A-T6 |
| BS | Reino Unido | 6005A-T6 (extrusions) |
Propriedades
Composição Química
Alloy 6005
| Elemento Químico | % Presente |
| Manganês (Mn) | 0.00 - 0.50 |
| Ferro (Fe) | 0.00 - 0.35 |
| Magnésio (Mg) | 0.40 - 0.70 |
| Silício (Si) | 0.50 - 0.90 |
| Zinco (Zn) | 0.00 - 0.20 |
| Titânio (Ti) | 0.00 - 0.10 |
| Cromo (Cr) | 0.00 - 0.30 |
| Cobre (Cu) | 0.00 - 0.30 |
| Manganese + Chromium (Mn+Cr) | 0.12 - 0.50 |
| Outro (Cada) | 0.00 - 0.05 |
| Outros (Total) | 0.00 - 0.15 |
| Alumínio (Al) | Equilíbrio |
Propriedades Mecânicas
Hollow Profile 5mm to 15mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 200 MPa |
| Resistência à Tração | 250 Mpa |
| Alongamento A50 mm | 6 Min % |
| Dureza Brinell | 85 HB |
| Alongamento A | 8 Min % |
Hollow Profile Up to 5mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 215 Min MPa |
| Resistência à Tração | 255 Min MPa |
| Alongamento A50 mm | 6 Min % |
| Dureza Brinell | 85 HB |
| Alongamento A | 8 Min % |
Open Profile 10mm to 25mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 200 MPa |
| Resistência à Tração | 250 Mpa |
| Alongamento A50 mm | 6 Min % |
| Dureza Brinell | 85 HB |
| Alongamento A | 8 Min % |
Open Profile 5mm to 10mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 215 Min MPa |
| Resistência à Tração | 260 Min MPa |
| Alongamento A50 mm | 6 Min % |
| Dureza Brinell | 85 HB |
| Alongamento A | 8 Min % |
Open Profile Up to 5mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 225 Min MPa |
| Resistência à Tração | 270 Min MPa |
| Alongamento A50 mm | 6 Min % |
| Dureza Brinell | 90 HB |
| Alongamento A | 8 Min % |
Tube 5mm to 10mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 215 Min MPa |
| Resistência à Tração | 260 Min MPa |
| Alongamento A50 mm | 6 Min % |
| Dureza Brinell | 85 HB |
| Alongamento A | 8 Min % |
Tube Up To 5mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 225 Min MPa |
| Resistência à Tração | 270 Min MPa |
| Alongamento A50 mm | 6 Min % |
| Dureza Brinell | 90 HB |
| Alongamento A | 8 Min % |
Bar 50mm to 100mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 215 Min MPa |
| Resistência à Tração | 260 Min MPa |
| Dureza Brinell | 85 HB |
| Alongamento A | 8 Min % |
Rod & Bar 25mm to 50mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 225 Min MPa |
| Resistência à Tração | 270 Min MPa |
| Dureza Brinell | 90 HB |
| Alongamento A | 8 Min % |
Rod & Bar up to 25mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 225 Min MPa |
| Resistência à Tração | 270 Min MPa |
| Alongamento A50 mm | 8 % |
| Shear Strength | 205 MPa |
| Dureza Brinell | 90 HB |
| Alongamento A | 10 Min % |
Propriedades Físicas Gerais
| Propriedade Física | Valor |
| Densidade | 2,70 g/cm³ |
| Ponto de Fusão | 605 °C |
| Expansão Térmica | 24 x 10-6/K |
| Módulo de Elasticidade | 70 GPa |
| Condutividade Térmica | 188 W/m.K |
| Resistividade elétrica | 0.034 x 10-6Ω .m |
Aplicativos
- Tubing for furniture
- Railway and bus profile structures
- Pylons, platforms and pipelines
- Portable ladders
- Sections where greater strength is needed than given by 6060 and 6063
Características
- Excellent weldability
- Very good bending properties
- Excelente resistência à corrosão
- Suitable for anodising
Informações Adicionais
Fabricação
- Workability-Cold: Fair
- Machinability: Fair
Soldabilidade
- The weldability of 6005A is excellent. 4043 welding wire is recommended unless joining to one of the 7XXX series. In this case 5356 wire is the suggested alternative.
- Weldability – Gas: Excellent
- Weldability – Arc: Excellent
- Weldability – Resistance: Excellent
- Brazability: Excellent