Aluminium, Commercial Alloy
Aluminium Alloy 6061 T6 Extrusions
Most versatile heat treatable aluminium alloy.
Aluminium alloy 6061 is a medium to high strength heat-treatable alloy with a strength higher than 6005A.
It is the most versatile of the heat-treatable alloys and is typically used in heavy duty structures.
PDFni yuklab oling
Dayoq
ILTIMOS, E'TIBORGA OLING
Agar siz izlayotgan narsani topa olmasangiz, iltimos, o'z… bilan bog'laning. Mahalliy xizmat markazi Sizning aniq talablaringizga muvofiq.
6061 T6 Aluminium Related Specifications
| Tizim / Standart | Davlat / mintaqa | Sinf / Lavozim |
| Ikki nuqtali | AQSh | 6061-T6 |
| Birlashgan Millatlar Tashkiloti | Xalqaro | A96061 (6061-T6) |
| Ingliz / Nemis | Yevropa | EN AW-6061-T6 |
| EN Nom | Yevropa | AlMg1SiCu-T6 |
| Buyuk Britaniya | Xitoy | 6061-T6 |
| JIS | Yaponiya | A6061-T6 |
| BS | Buyuk Britaniya | 6061-T6 (extrusions) |
Xususiyatlari
Kimyoviy tarkib
Alloy 6061
| Kimyoviy element | % Hozir |
| Marganets (Mn) | 0.00 - 0.15 |
| Temir (Fe) | 0.00 - 0.70 |
| Magniy (Mg) | 0.80 - 1.20 |
| Silikon (Si) | 0.40 - 0.80 |
| Mis (Cu) | 0.15 - 0.40 |
| Rux (Zn) | 0.00 - 0.25 |
| Titan (Ti) | 0.00 - 0.15 |
| Xrom (Cr) | 0.04 - 0.35 |
| Boshqa (har biri) | 0.00 - 0.05 |
| Boshqalar (Jami) | 0.00 - 0.15 |
| Aluminiy (Al) | Muvozanat |
Mexanik xususiyatlari
Extrusions Up to 200mm Dia. & A/F, 5mm WT for Tube and Prof
| Mexanik xususiyat | Qiymat |
| Dalil stress | 240 Min MPa |
| Cho'zilish mustahkamligi | 260 Min MPa |
| Brinell qattiqligi | 95 HB |
Umumiy jismoniy xususiyatlari
| Jismoniy xususiyat | Qiymat |
| Zichlik | 2,70 g/sm³ |
| Erish nuqtasi | 650 °C |
| Issiqlik kengayishi | 23.4 x 10⁻⁶/K |
| Elastiklik moduli | 70 GPa |
| Issiqlik o'tkazuvchanligi | 166 Vt/m·K |
| Elektrik qarshiligi | 0.040 x 10⁻⁶ Ω·m |
Xususiyatlari
- Very good corrosion resistance
- Very good weldability although reduced strength in the weld zone
- Medium fatigue strength
- Good cold formability in the temper T4, but limited formability in T6 temper
- Not suitable for very complex cross sections
Qo'shimcha ma'lumot
Payvandlanuvchanlik
| Process | Rating |
| Weldability - Gas | Yaxshi |
| Weldability - Arc | Very Good |
| Weldability - Resistance | Yaxshi |
| Brazability | Yaxshi |
| Solderability | Yaxshi |
Yasalishi
| Process | Rating |
| Workability - Cold | Yaxshi |
| Mashinaga ishlov berish imkoniyati | Acceptable |
