Aluminium, Commercial Alloy
5754 H22 Sheet & Plate
Excellent resistance to corrosion, especially seawater. Ideal in the marine, nuclear, chemical and oil & gas industries.
Aluminium alloy 5754 has excellent corrosion resistance especially to seawater and industrially polluted atmospheres such as marine, nuclear, chemical, oil & gas industry applications.
It has higher strength than 5251. This high strength makes 5754 highly suited to flooring applications.
Plate can be cut to customer requirements. Contact your local Service Centre for further details.
Please note that mechanical properties shown are for H22.
BAIXAR PDF
Faixa
ATENÇÃO
Se você não encontrar o que procura, entre em contato com seu centro de serviço local com seus requisitos específicos.
5754 H22 Aluminium Related Specifications
| Sistema / Padrão | País / Região | Grau / Designação |
| AA | EUA | 5754-H22 |
| UNS | Internacional | A95754 (5754-H22) |
| EN / DIN | Europa | EN AW-5754-H22 / 3.3535 |
| Nome em Português | Europa | AlMg3-H22 |
| GB | China | 5754-H22 |
| BS | Reino Unido | 5754-H22 (sheet / plate) |
| AFNOR | França | A-G3M-H22 |
Propriedades
Composição Química
Alloy 5754
| Elemento Químico | % Presente |
| Manganês (Mn) | 0.00 - 0.50 |
| Ferro (Fe) | 0.00 - 0.40 |
| Magnesium (Mg) | 2.60 - 3.60 |
| Silício (Si) | 0.00 - 0.40 |
| Cromo (Cr) | 0.00 - 0.30 |
| Cobre (Cu) | 0.00 - 0.10 |
| Manganese + Chromium (Mn+Cr) | 0.10 - 0.60 |
| Other (Each) | 0.00 - 0.05 |
| Others (Total) | 0.00 - 0.15 |
| Titânio (Ti) | 0.00 - 0.15 |
| Zinc (Zn) | 0.00 - 0.20 |
| Aluminium (Al) | Equilíbrio |
Propriedades Mecânicas
Sheet & Plate 0.2mm to 40mm
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 130 Min MPa |
| Resistência à Tração | 220 - 270 MPa |
| Dureza Brinell | 63 HB |
| Alongamento A50 mm | 7 Min % |
Propriedades Físicas Gerais
| Propriedade Física | Valor |
| Densidade | 2.66 g/cm³ |
| Ponto de Fusão | 600 °C |
| Expansão Térmica | 24 x 10-6/K |
| Módulo de Elasticidade | 68 GPa |
| Condutividade Térmica | 147 W/m.K |
| Resistividade elétrica | 0.049 x 10-6 Ω .m |
Aplicativos
- High strength aerospace components
- Military vehicles
- Bridges
- Weapons manufacture
- Structural applications
Characteristics
- Machinability of aluminium alloy 2014A is very good.
- Resistance to atmospheric attack is poor especially when exposed to water or salt environments. To protect against atmospheric corrosion in storage, lightly coat with lanolin based protective oil.
- Good hard anodising capability
- Good strength levels after heat treatment
Informações Adicionais
Fabricação
| Process | Rating |
| Workability - Cold | Very Good |
| Usinabilidade | Average |
Soldabilidade
| Process | Rating |
| Weldability - Gas | Excelente |
| Weldability - Arc | Excelente |
| Weldability - Resistance | Excelente |
| Brazability | Poor |