Alüminyum, Ticari Alaşım
5754 H22 Sheet & Plate
Excellent resistance to corrosion, especially seawater. Ideal in the marine, nuclear, chemical and oil & gas industries.
Aluminium alloy 5754 has excellent corrosion resistance especially to seawater and industrially polluted atmospheres such as marine, nuclear, chemical, oil & gas industry applications.
It has higher strength than 5251. This high strength makes 5754 highly suited to flooring applications.
Plate can be cut to customer requirements. Contact your local Service Centre for further details.
Please note that mechanical properties shown are for H22.
PDF İNDİR
Menzil
LÜTFEN DİKKAT
Aradığınız şeyi göremiyorsanız, lütfen yerel servis merkezi özel gereksinimlerinizle.
5754 H22 Aluminium Related Specifications
| Sistem / Standart | Ülke / Bölge | Sınıf / Görevlendirme |
| AA | ABD | 5754-H22 |
| UNS | Uluslararası | A95754 (5754-H22) |
| EN / DIN | Avrupa | EN AW-5754-H22 / 3.3535 |
| EN Adı | Avrupa | AlMg3-H22 |
| GB | Çin | 5754-H22 |
| BS | BIRLEŞIK KRALLIK | 5754-H22 (sheet / plate) |
| AFNOR | Fransa | A-G3M-H22 |
Özellikler
Kimyasal Bileşim
Alloy 5754
| Kimyasal Element | % Mevcut |
| Manganez (Mn) | 0.00 - 0.50 |
| Demir (Fe) | 0.00 - 0.40 |
| Magnezyum (Mg) | 2.60 - 3.60 |
| Silisyum (Si) | 0.00 - 0.40 |
| Krom (Cr) | 0.00 - 0.30 |
| Bakır (Cu) | 0.00 - 0.10 |
| Manganese + Chromium (Mn+Cr) | 0.10 - 0.60 |
| Diğer (Her biri) | 0.00 - 0.05 |
| Diğerleri (Toplam) | 0.00 - 0.15 |
| Titanyum (Ti) | 0.00 - 0.15 |
| Çinko (Zn) | 0.00 - 0.20 |
| Alüminyum (Al) | Denge |
Mekanik Özellikler
Sheet & Plate 0.2mm to 40mm
| Mekanik Mülkiyet | Değer |
| Kanıt Stres | 130 Min MPa |
| Çekme Dayanımı | 220 - 270 MPa |
| Sertlik Brinell | 63 HB |
| Elongation A50 mm | 7 Min % |
Genel Fiziksel Özellikler
| Fiziksel Özellikler | Değer |
| Yoğunluk | 2.66 g/cm³ |
| Erime Noktası | 600 °C |
| Termal Genleşme | 24 x 10-6/K |
| Elastisite Modülü | 68 GPa |
| Termal İletkenlik | 147 W/m.K |
| Elektriksel Dirençlilik | 0.049 x 10-6 Ω .m |
Uygulamalar
- High strength aerospace components
- Military vehicles
- Bridges
- Weapons manufacture
- Structural applications
Özellikler
- Machinability of aluminium alloy 2014A is very good.
- Resistance to atmospheric attack is poor especially when exposed to water or salt environments. To protect against atmospheric corrosion in storage, lightly coat with lanolin based protective oil.
- Good hard anodising capability
- Good strength levels after heat treatment
Ek Bilgi
Fabrikasyon
| Süreç | Değerlendirme |
| İşlenebilirlik - Soğuk | Çok iyi |
| İşlenebilirlik | Ortalama |
Kaynaklanabilirlik
| Süreç | Değerlendirme |
| Kaynaklanabilirlik - Gaz | Excellent |
| Kaynaklanabilirlik - Ark | Excellent |
| Kaynaklanabilirlik - Direnç | Excellent |
| Yüzsüzlük | Zayıf |