Aluminium, AMS
AMS 4342 T74511 Bar & Extrusion
High strength aerospace aluminium alloy with good resistance to stress-corrosion cracking.
Used in aircraft structural parts, aluminium alloy AMS 4342-7050 is an aerospace grade of aluminium combining high strength, stress corrosion cracking resistance and toughness.
It is particularly suited for heavy plate applications (3″ to 6″ thick) due to its lower quench sensitivity and retention of strength in thicker sections.
TẢI XUỐNG PDF
Phạm vi
XIN LƯU Ý
Nếu bạn không tìm thấy thông tin mình cần, vui lòng liên hệ với trung tâm dịch vụ địa phương theo các yêu cầu cụ thể của quý khách.
4342 T74511 Aluminium Related Specifications
| Hệ thống / Tiêu chuẩn | Quốc gia / Khu vực | Grade / Designation / Note |
| AA | Hoa Kỳ | 4342-T74511 – non-standard / proprietary aluminium designation |
| EN / DIN | Châu Âu | No standard EN AW grade published as “4342” in T74511 temper |
| UNS | Quốc tế | No official UNS aluminium number assigned for 4342-T74511 |
| GB / JIS / BS | China / Japan / UK | No widely recognised aluminium equivalents under these systems |
Thuộc tính
Thành phần hóa học
Alloy 4342
SAE AMS 4342
| Nguyên tố hóa học | Quà tặng % |
| Silic (Si) | 0.00 - 0.12 |
| Sắt (Fe) | 0.00 - 0.15 |
| Đồng (Cu) | 2.00 - 2.60 |
| Mangan (Mn) | 0.00 - 0.10 |
| Magnesium (Mg) | 1.90 - 2.60 |
| Crom (Cr) | 0.00 - 0.04 |
| Zinc (Zn) | 5.70 - 6.70 |
| Zirconium (Zr) | 0.08 - 0.15 |
| Titan (Ti) | 0.00 - 0.06 |
| Other (Each) | 0.00 - 0.05 |
| Others (Total) | 0.00 - 0.15 |
| Aluminium (Al) | Cân bằng |
Tính chất cơ học
Bar
SAE AMS 4342
| Tính chất cơ học | Giá trị |
| Áp suất giới hạn | 434 Min MPa |
| Độ bền kéo | 503 Min MPa |
| Độ giãn dài tại 50 mm | 6 Min % |
Ứng dụng
- Aircraft structural parts
- Fuselage frames
- Bulkheads
- Wing skins
Đặc điểm
- Độ bền cao
- Good resistance to exfoliation and stress cracking
- Good fracture toughness & fatigue resistance