ເຫຼັກສະແຕນເລດ, ອໍສະເຕນິດ
304L Stainless Steel (S30403)
Low carbon chromium-nickel austenitic stainless steel.
Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition of type 304 being 18% chromium and 8% nickel.
304L stainless steel is a low-carbon variant of 304 austenitic stainless steel. It is known for its excellent corrosion resistance, good mechanical properties, and superior weldability, particularly in applications where post-weld corrosion resistance is critical.
Type 304L is the low carbon version of 304. It is used in heavy gauge components for improved weldability. Some products such as plate and pipe may be available as “dual certified” material that meets the criteria for both 304 and 304L.
Quarto Plate is hot rolled plate over 12mm thick that has not been coiled during production. CPP is continuously produced plate up to 12mm thick that has been coiled during rolling. Sheet is cold rolled.
ດາວໂຫຼດ PDF
ຂອບເຂດ
| Bar & Tube | ຂະໜາດອິມພີເຣຍລ | ຂະໜາດແມັດຕຣິກ |
| Round Bar | 3" - 16" | |
| ແຖບແບນ | 20 x 10mm - 100 x 25mm | |
| Welded Ornamental Tube | 1⁄2" - 4" | 30mm - 50mm |
| Welded Tube | 1/"2 - 2" | 16mm - 50mm |
| Hygienic Tube | 3⁄4 " - 4" |
| Sheet/Plate | ຂະໜາດແຜ່ນ | ຄວາມໜາ |
| Polished Sheet | 2000 x 1000 | 0.7mm - 3.0mm |
| Polished Sheet | 2500 x 1250 | 0.7mm - 6.0mm |
| Polished Sheet | 3000 x 1500 | 1.0mm - 6.0mm |
| Polished Sheet (Circle) | 2500 x 1250 | 0.7mm - 1.5mm |
| Sheet Cold Rolled | 2500 x 1250 | 4.0mm - 6.0mm |
| Sheet Cold Rolled | 3000 x 1500 | 4.0mm - 6.0mm |
| Sheet Cold Rolled | 4000 x 2000 | 2.0mm - 6.0mm |
| CPP Plate ID Finish | 2000 x 1000 | 3.0mm - 6.0mm |
| CPP Plate ID Finish | 2500 x 1250 | 3.0mm - 12.0mm |
| CPP Plate ID Finish | 3000 x 1500 | 3.0mm - 12.0mm |
| CPP Plate ID Finish | 4000 x 1500 | 10.0mm - 12.0mm |
| CPP Plate ID Finish | 4000 x 2000 | 2.0mm - 12.0mm |
| Quarto Plate ID Finish | 5" - 125" | |
| Polished sheet sizes are for mirror and super mirror finishes. | ||
| Polished Sheet options available: 240 Silicon, 240 Grit and various coating including Fiber Optic Laser for one or two sides. | ||
ກະລຸນາຮັບຊາບ
ຖ້າທ່ານບໍ່ເຫັນສິ່ງທີ່ທ່ານກຳລັງຊອກຫາ, ກະລຸນາຕິດຕໍ່ຫາທ່ານ ສູນບໍລິການທ້ອງຖິ່ນ ກັບຄວາມຕ້ອງການສະເພາະຂອງທ່ານ.
304L Stainless Steel Related Specifications
| ລະບົບ / ມາດຕະຖານ | ປະເທດ / ພາກພື້ນ | ຊັ້ນ / ຕຳແໜ່ງ |
| AISI | ສະຫະລັດອາເມລິກາ | 304L |
| ສະຫະປະຊາຊາດ | ສາກົນ | S30403 |
| EN / W.Nr. | ເອີຣົບ | 1.4307 |
| ຊື່ EN | ເອີຣົບ | X2CrNi18-9 |
| ASTM A240 | ສະຫະລັດອາເມລິກາ | 304L (plate, sheet, strip) |
| ASTM A276 | ສະຫະລັດອາເມລິກາ | 304L (bars, shapes) |
| ASTM A213 | ສະຫະລັດອາເມລິກາ | TP304L (boiler / HX tubes) |
| ASTM A312 | ສະຫະລັດອາເມລິກາ | TP304L (seamless pipe) |
| GB | ຈີນ | 022Cr19Ni10 |
| ຈີໄອເອສ | ຍີ່ປຸ່ນ | SUS304L |
| AFNOR | ປະເທດຝຣັ່ງ | Z2CN18-10 |
ຊັບສິນ
ສ່ວນປະກອບທາງເຄມີ
1.4307 Steel
EN 10088-3 & EN 10088-2
| ທາດເຄມີ | % ປັດຈຸບັນ |
| ຄາບອນ (C) | 0.00 - 0.03 |
| ໂຄຣມຽມ (Cr) | 17.50 - 19.50 |
| ແມງການີສ (Mn) | 0.00 - 2.00 |
| ຊິລິໂຄນ (Si) | 0.00 - 1.00 |
| ຟອສຟໍຣັດ (P) | 0.00 - 0.05 |
| ຊູນຟູຣິກ (S) | 0.00 - 0.02 |
| ນິກເກີນ (Ni) | 8.00 - 10.50 |
| ໄນໂຕຣເຈນ (N) | 0.00 - 0.11 |
| ທາດເຫຼັກ (Fe) | ຍອດເງິນ |
ຄຸນສົມບັດທາງກົນຈັກ
Bar & Section Up to 160mm Diameter/Thickness
EN 10088-3
| ຊັບສິນທາງກົນຈັກ | ມູນຄ່າ |
| ຫຼັກຖານຄວາມກົດດັນ | 175 Min MPa |
| ຄວາມຕ້ານທານແຮງດຶງ | 500 to 700 MPa |
| ການຍືດຕົວ A50 ມມ | 45 Min % |
| ຄວາມແຂງ Brinell | 215 Max HB |
Sheet Up to 8mm Thick
EN 10088-2
| ຊັບສິນທາງກົນຈັກ | ມູນຄ່າ |
| ຫຼັກຖານຄວາມກົດດັນ | 220 ນາທີ MPa |
| ຄວາມຕ້ານທານແຮງດຶງ | 520 to 700 MPa |
| ການຍືດຕົວ A50 ມມ | 45 Min % |
Plate From 8mm to 75mm Thick
EN 10088-2
| ຊັບສິນທາງກົນຈັກ | ມູນຄ່າ |
| ຫຼັກຖານຄວາມກົດດັນ | 200 Min MPa |
| ຄວາມຕ້ານທານແຮງດຶງ | 500 to 700 MPa |
| ການຍືດຕົວ A50 ມມ | 45 Min % |
ຄຸນສົມບັດທາງກາຍະພາບທົ່ວໄປ
| ຊັບສິນທາງກາຍະພາບ | ມູນຄ່າ |
| ຄວາມໜາແໜ້ນ | 8.0 g/cm³ |
| ຈຸດລະລາຍ | 1450 °C |
| ການຂະຫຍາຍຕົວທາງຄວາມຮ້ອນ | 17.2 x 10-6/K |
| ໂມດູນຄວາມຍືດຫຍຸ່ນ | 193 ເກຣດສະເລ່ຍ |
| ການນຳຄວາມຮ້ອນ | 16.2 W/m.K |
| ຄວາມຕ້ານທານໄຟຟ້າ | 0.72 x 10-6 Ω .m |
Applications of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel known for its excellent corrosion resistance, high ductility, and superior weldability. Its low carbon content makes it ideal for welded components and equipment exposed to corrosive environments.
1. Chemical and Petrochemical Industry
Storage tanks and pressure vessels
Piping systems for acids and corrosive liquids
Heat exchangers and condensers
2. Food and Beverage Industry
Food processing equipment and containers
Brewing, dairy, and pharmaceutical machinery
Tanks, pipelines, and fittings requiring hygienic surfaces
3. ການນຳໃຊ້ດ້ານສະຖາປັດຕະຍະກຳ ແລະ ການຕົກແຕ່ງ
Cladding and exterior panels
Handrails, trims, and decorative fixtures
Kitchen and household appliances
4. Medical and Pharmaceutical Equipment
Surgical instruments and medical devices
Sterile processing equipment
Laboratory benches and components
5. Industrial Applications
Pumps, valves, and fasteners in corrosive environments
Components in wastewater treatment systems
General manufacturing equipment exposed to moisture or mild chemicals
ສະຫຼຸບ
304L stainless steel is widely used in applications requiring excellent corrosion resistance, high weldability, and good formability. Its ability to resist intergranular corrosion after welding makes it ideal for chemical, food, pharmaceutical, architectural, and industrial applications.
Characteristics of 304L Stainless Steel
304L stainless steel is a low-carbon variant of 304 austenitic stainless steel, offering excellent corrosion resistance, good mechanical properties, and enhanced weldability. It is widely used in applications where post-weld corrosion resistance is important.
1. Chemical Composition
Low carbon content (≤0.03%) to minimize ການເຮັດໃຫ້ຮູ້ສຶກໄວ during welding.
Contains chromium (18–20%) ແລະ nickel (8–12%).
Trace elements enhance corrosion resistance and mechanical stability.
2. ຄວາມຕ້ານທານການກັດກ່ອນ
ຄວາມຕ້ານທານທີ່ດີເລີດຕໍ່ກັບ oxidation, general corrosion, and mild acid attack.
ທົນທານຕໍ່ intergranular corrosion after welding, unlike standard 304 stainless steel.
ເໝາະສົມສຳລັບ food, chemical, and pharmaceutical environments.
3. ຄຸນສົມບັດທາງກົນຈັກ
ດີ tensile strength and yield strength.
ສູງ ຄວາມຍືດຫຍຸ່ນ ແລະ ຄວາມແຂງກະດ້າງ, even at low temperatures.
Maintains excellent properties over a wide range of temperatures.
4. ການຜະລິດ ແລະ ການສ້າງຮູບແບບ
ດີເລີດ cold working and forming characteristics.
ສາມາດເປັນໄດ້ welded easily with minimal risk of corrosion in the heat-affected zone.
ເໝາະສົມສຳລັບ deep drawing, bending, and stamping.
5. Heat and Temperature Resistance
ປະຕິບັດໄດ້ດີໃນ moderate heat applications.
Retains strength and corrosion resistance under normal service temperatures.
6. Applications
Food processing equipment and storage tanks
Chemical and pharmaceutical equipment
Architectural and decorative components
Piping, valves, and tanks requiring high weld integrity
ສະຫຼຸບ
304L stainless steel is characterized by excellent corrosion resistance, good mechanical properties, high ductility, and superior weldability. Its low carbon content ensures post-weld corrosion protection, ເຮັດໃຫ້ມັນເໝາະສົມສຳລັບ chemical, food, pharmaceutical, and industrial applications.
ຂໍ້ມູນເພີ່ມເຕີມ
ຄວາມສາມາດໃນການເຊື່ອມ
Weldability of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel that offers ການເຊື່ອມທີ່ດີເລີດ. The reduced carbon content (<0.03%) minimizes the risk of ການເຮັດໃຫ້ຮູ້ສຶກໄວ ແລະ ການກັດກ່ອນລະຫວ່າງເມັດ in the heat-affected zone (HAZ) after welding, making 304L ideal for welded assemblies in corrosive environments.
1. Compatible Welding Processes
TIG (GTAW): Ideal for precision welding of thin sections.
MIG (GMAW): Common for thicker sections and high-productivity applications.
Shielded Metal Arc Welding (SMAW): Suitable for field and maintenance welding.
ການເຊື່ອມໂລຫະຕ້ານທານ: Spot and seam welding are effective for sheet and thin components.
2. Carbon Content Benefits
The low carbon content reduces the likelihood of chromium carbide precipitation.
Prevents ການເຮັດໃຫ້ຮູ້ສຶກໄວ in welded or heat-affected zones, maintaining corrosion resistance without the need for post-weld annealing.
3. Filler Material Selection
Matching filler metals such as ER308L are recommended to maintain corrosion resistance and mechanical properties.
Low-carbon fillers are preferred for thicker sections or critical applications.
4. Heat Input and Distortion
Austenitic stainless steels, including 304L, have ການຂະຫຍາຍຕົວທາງຄວາມຮ້ອນສູງ, ເຊິ່ງສາມາດນໍາໄປສູ່ການບິດເບືອນໄດ້.
Moderate heat input and proper welding sequence help minimize warping and residual stresses.
Fixturing and tack welding can further reduce distortion during fabrication.
5. Post-Weld Treatment
Post-weld annealing is usually not required for corrosion resistance due to low carbon content.
Stress relief may be applied in critical applications where dimensional stability or high-temperature service is required.
6. Applications Leveraging Weldability
Chemical and food processing equipment
Pressure vessels and piping systems
Architectural structures
Heat exchangers and tanks requiring welded assemblies
ສະຫຼຸບ
304L stainless steel provides ການເຊື່ອມທີ່ດີເລີດ due to its low carbon content, enabling strong, corrosion-resistant welds without the need for extensive post-weld heat treatment. Proper filler selection, heat control, and welding technique ensure reliable performance in industrial, chemical, and architectural applications.
ການຜະລິດ
Fabrication of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel widely used for its excellent corrosion resistance, weldability, and formability. It is highly versatile and can be fabricated using standard metalworking processes.
1. ການຂຶ້ນຮູບ
ການຂຶ້ນຮູບເຢັນ:
304L has ການສ້າງຮູບແບບເຢັນທີ່ດີເລີດ, making it suitable for bending, rolling, stamping, and deep drawing.
Work hardening occurs during deformation, so ການອົບແຫ້ງລະດັບປານກາງ may be necessary for extensive forming.
ການຂຶ້ນຮູບຮ້ອນ:
Hot working can be performed at 1010–1175°C (1850–2150°F) to shape thick or complex components.
Produces uniform mechanical properties and reduces the effects of work hardening.
2. ການຕັດ ແລະ ການຕັດ
Can be cut using shears, saws, laser cutting, or waterjet cutting.
Sharp tools and proper feeds are recommended to minimize ການແຂງຕົວຂອງວຽກ and ensure smooth edges.
3. ເຄື່ອງຈັກ
304L is moderately difficult to machine due to its toughness and tendency to work harden.
ເຄື່ອງມືຄາໄບດ໌ is preferred for high-speed cutting.
Coolants and cutting fluids help control heat and extend tool life.
4. ການເຊື່ອມໂລຫະ
304L exhibits ການເຊື່ອມທີ່ດີເລີດ thanks to its low carbon content.
Prevents chromium carbide precipitation and intergranular corrosion in welded areas.
Common processes: TIG (GTAW), MIG (GMAW), SMAW, and resistance welding.
Filler metals such as ER308L are recommended for maintaining corrosion resistance.
5. ການເຮັດວຽກເຢັນ
Cold working increases strength via work hardening.
Extensive deformation reduces ductility, so ການອົບແຫ້ງດ້ວຍສານລະລາຍ may be performed to restore formability for subsequent fabrication.
6. ການສຳເລັດຮູບພື້ນຜິວ
Can be supplied in various finishes, including 2B (mill finish), BA (bright annealed), and polished.
Cold working may require additional finishing to achieve desired surface aesthetics or corrosion resistance.
7. ການນຳໃຊ້ຜະລິດຕະພັນທີ່ນຳໃຊ້ການຜະລິດ
Chemical and food processing equipment
Pressure vessels, piping systems, and tanks
Architectural panels and structural components
Heat exchangers and welded assemblies
ສະຫຼຸບ
304L stainless steel is ມີຄວາມຫຼາກຫຼາຍ ແລະ ງ່າຍຕໍ່ການຜະລິດ, offering excellent cold and hot formability, machining, and welding properties. Its low carbon content ensures corrosion resistance is maintained during welding and forming, making it ideal for industrial, chemical, architectural, and food processing applications.
ການເຮັດວຽກຮ້ອນ
Hot Working of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel ດ້ວຍດີເລີດ ຄວາມສາມາດໃນການເຮັດວຽກຮ້ອນ, allowing it to be formed, rolled, or forged at elevated temperatures. Hot working reduces work hardening and improves ductility, toughness, and uniformity in mechanical properties.
1. ອຸນຫະພູມເຮັດວຽກທີ່ແນະນຳໃຫ້ໃຊ້ຮ້ອນ
ຂອບເຂດປົກກະຕິ: 1010–1175°C (1850–2150°F)
ການເຮັດວຽກຢູ່ເໜືອຂອບເຂດນີ້ອາດຈະເຮັດໃຫ້ເກີດ ການເຕີບໃຫຍ່ຂອງເມັດພືດ, ການຫຼຸດຜ່ອນຄວາມແຂງກະດ້າງ.
Working below this range increases flow stress and the risk of cracking.
2. ຂະບວນການເຮັດວຽກຮ້ອນທີ່ເໝາະສົມ
ມ້ວນຮ້ອນ: For sheets, plates, strips, and structural components
ການຕີເຫຼັກຮ້ອນ: For high-strength or complex-shaped parts
ການອັດຮ້ອນ: For rods, tubes, and profiles
ການກົດ/ການຂຶ້ນຮູບດ້ວຍຄວາມຮ້ອນ: For thick or large components that are difficult to cold-work
3. ຂໍ້ດີຂອງການເຮັດວຽກຮ້ອນ
ຫຼຸດຜ່ອນຜົນກະທົບຂອງ ການແຂງຕົວຂອງວຽກ ເມື່ອທຽບກັບການເຮັດວຽກເຢັນ
ເສີມສ້າງ ຄວາມຍືດຫຍຸ່ນ ແລະ ຄວາມແຂງກະດ້າງ
ຜະລິດ ໂຄງສ້າງເມັດພືດທີ່ເປັນເອກະພາບ ແລະຄຸນສົມບັດທາງກົນຈັກ
Enables fabrication of large, thick, or complex components
4. ການປິ່ນປົວຫຼັງຈາກເຮັດວຽກຮ້ອນ
ການອົບແຫ້ງ may be applied to relieve residual stresses and restore ductility.
ການດອງ ຫຼື ການເຮັດໃຫ້ຊຸ່ມ enhances surface corrosion resistance after hot working.
5. ຄໍາຮ້ອງສະຫມັກທີ່ນໍາໃຊ້ການເຮັດວຽກຮ້ອນ
Structural components in industrial machinery
Automotive and aerospace parts
Pressure vessels and piping
Large sheets, plates, or complex forms requiring elevated-temperature shaping
ສະຫຼຸບ
304L stainless steel demonstrates ການເຮັດວຽກຮ້ອນດີເລີດ, allowing rolling, forging, extrusion, and forming at 1010–1175°C. Hot working improves ductility, reduces work hardening, and ensures uniform mechanical properties while preserving corrosion resistance, making it ideal for industrial, structural, and high-performance applications.
ຄວາມຕ້ານທານຄວາມຮ້ອນ
Heat Resistance of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel with good high-temperature properties, suitable for service in moderately elevated temperatures. Its low carbon content minimizes ການເຮັດໃຫ້ຮູ້ສຶກໄວ and maintains corrosion resistance during prolonged heat exposure.
1. ອຸນຫະພູມການບໍລິການຢ່າງຕໍ່ເນື່ອງ
ເໝາະສົມສຳລັບການບໍລິການຢ່າງຕໍ່ເນື່ອງໃນ ບັນຍາກາດອົກຊິໄດສູງເຖິງ ~870°C (1600°F).
Prolonged exposure to temperatures above this range may lead to oxidation scaling and reduced mechanical properties.
2. ການສຳຜັດກັບແສງເປັນໄລຍະໆ
ສາມາດທົນໄດ້ ການໃຫ້ຄວາມຮ້ອນເປັນໄລຍະໆສູງເຖິງ ~925°C (1700°F) without significant degradation.
Useful for components subjected to occasional thermal cycles.
3. ຄວາມຕ້ານທານການຜຸພັງ
ປະກອບເປັນ ຊັ້ນປ້ອງກັນໂຄຣມຽມອອກໄຊ ໃນບັນຍາກາດອົກຊິໄດ.
Prevents scaling and surface deterioration in moderate temperature service.
Not suitable for strongly oxidizing or sulfidizing environments at very high temperatures.
4. ຜົນກະທົບທາງຄວາມຮ້ອນຕໍ່ຄຸນສົມບັດທາງກົນຈັກ
Maintains good ຄວາມແຮງດຶງ ແລະ ຄວາມຍືດຫຍຸ່ນ up to moderate temperatures.
Prolonged exposure to high heat may reduce work-hardening effects in cold-worked material.
Grain growth can occur if improperly annealed at elevated temperatures.
5. ຄໍາຮ້ອງສະຫມັກທີ່ກ່ຽວຂ້ອງກັບຄວາມຕ້ານທານຄວາມຮ້ອນ
Heat exchangers and furnace components
Tanks and piping exposed to moderate high temperatures
Food and chemical processing equipment requiring heat exposure
Welded assemblies operating at elevated temperatures
6. ການປຽບທຽບກັບເກຣດ Austenitic ອື່ນໆ
ຄວາມຕ້ານທານຄວາມຮ້ອນແມ່ນ slightly lower than 321 or 347 stainless steels for long-term high-temperature service.
304L is chosen for applications emphasizing corrosion resistance and weldability rather than extreme high-temperature strength.
ສະຫຼຸບ
304L stainless steel provides good heat resistance, suitable for continuous service up to ~870°C and intermittent exposure up to ~925°C. Its low carbon content preserves corrosion resistance and prevents sensitization, making it ideal for welded assemblies and moderately high-temperature industrial applications.
ຄວາມສາມາດໃນການປຸງແຕ່ງ
Machinability of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel ນັ້ນແມ່ນ moderately difficult to machine. Its toughness, work-hardening tendency, and low thermal conductivity require careful selection of tooling, cutting parameters, and cooling methods to achieve efficient machining and good surface finish.
1. ພຶດຕິກຳທີ່ເນັ້ນການເຮັດວຽກໜັກ
304L exhibits ການແຂງຕົວຂອງວຽກ during cutting, especially when using slow feed rates or worn tooling.
ພື້ນຜິວທີ່ແຂງຂຶ້ນຈະເພີ່ມແຮງຕັດ ແລະ ເລັ່ງການສວມໃສ່ຂອງເຄື່ອງມື.
Continuous and smooth cutting helps minimize work-hardening.
2. ຄໍາແນະນໍາກ່ຽວກັບເຄື່ອງມື
ເຄື່ອງມືຄາໄບດ໌ is preferred for high-speed and high-volume machining.
ເຫຼັກກ້າຄວາມໄວສູງ (HSS) tools can be used at lower cutting speeds.
ເຄື່ອງມືທີ່ມີ ມຸມກວາດບວກ reduce cutting forces and heat generation.
3. ຄວາມໄວໃນການຕັດ ແລະ ອັດຕາປ້ອນ
ແນະນຳໃຫ້ໃຊ້ຄວາມໄວຕັດທີ່ຊ້າກວ່າເຫຼັກກາກບອນ.
Use moderate to heavy feeds to maintain continuous chip flow and prevent local work-hardening.
4. ການເຮັດຄວາມເຢັນ ແລະ ການຫລໍ່ລື່ນ
ເຫຼັກສະແຕນເລດ Austenitic ມີ low thermal conductivity, causing heat buildup at the cutting zone.
Flood coolant, cutting oils, or high-pressure lubricants help reduce heat, extend tool life, and improve surface finish.
5. ການສ້າງຊິບ
Chips are usually tough and stringy, which can be difficult to remove.
Use chip breakers or specially designed inserts to manage chip evacuation effectively.
6. ການສຳເລັດຮູບພື້ນຜິວ
Good surface finishes are achievable with sharp tools, proper feeds, and effective cooling.
Avoid dwelling or pauses on the workpiece, as these can create hardened spots and reduce finish quality.
ສະຫຼຸບ
304L stainless steel has ຄວາມສາມາດໃນການປຸງແຕ່ງປານກາງ, requiring sharp tools, controlled cutting parameters, and proper cooling to counteract work-hardening and achieve high-quality finished components. Its low carbon content helps maintain corrosion resistance in welded and machined parts, making it suitable for industrial, chemical, and food-processing applications.
ຄວາມຕ້ານທານການກັດກ່ອນ
Corrosion Resistance of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel known for its excellent corrosion resistance in a wide range of environments. Its low carbon content minimizes ການຕົກຕະກອນໂຄຣມຽມຄາໄບດ໌ during welding, maintaining corrosion resistance in welded and heat-affected areas.
1. ຄວາມຕ້ານທານການກັດກ່ອນທົ່ວໄປ
Resists oxidation and general corrosion in atmospheric, industrial, and mildly corrosive environments.
ປະຕິບັດໄດ້ດີໃນ food, chemical, and pharmaceutical applications where hygiene and corrosion resistance are critical.
2. Resistance to Intergranular Corrosion
Low carbon (<0.03%) prevents ການຕົກຕະກອນໂຄຣມຽມຄາໄບດ໌ during welding.
Protects against ການເຮັດໃຫ້ຮູ້ສຶກໄວ in the heat-affected zone (HAZ) and welded areas.
Eliminates the need for post-weld solution annealing in most applications.
3. ຄວາມຕ້ານທານຕໍ່ຄລໍໄຣດ໌
Moderately resistant to chloride-induced pitting and crevice corrosion, though less resistant than Mo-bearing grades like 316.
Suitable for freshwater, mild saltwater, and general chemical exposure, but not for highly concentrated chloride solutions.
4. ການກັດກ່ອນໃນອຸນຫະພູມສູງ
Continuous service up to ~870°C (1600°F) ໃນບັນຍາກາດອົກຊິໄດ.
Intermittent service up to ~925°C (1700°F).
Low carbon content helps maintain corrosion resistance in high-temperature welding applications.
5. ຄໍາຮ້ອງສະຫມັກທີ່ນໍາໃຊ້ຄວາມຕ້ານທານການກັດກ່ອນ
Pressure vessels, tanks, and piping in chemical and food-processing industries
Architectural structures and cladding exposed to weather
Heat exchangers and boilers
Welded assemblies in corrosive environments
6. ການປຽບທຽບກັບເກຣດ Austenitic ອື່ນໆ
Better resistance to intergranular corrosion than 304 due to low carbon content.
Slightly lower chloride resistance than 316 or 317 stainless steels.
Preferred for welded assemblies and environments where corrosion resistance and weldability are both critical.
ສະຫຼຸບ
304L stainless steel provides ຕ້ານທານການກັດກ່ອນທົ່ວໄປ ແລະ ລະຫວ່າງເມັດທີ່ດີເລີດ, particularly in welded structures, thanks to its low carbon content. It is suitable for a broad range of industrial, chemical, food-processing, and architectural applications, combining durability, hygiene, and reliability in corrosive environments.
ການປິ່ນປົວດ້ວຍຄວາມຮ້ອນ
Heat Treatment of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel ນັ້ນແມ່ນ ບໍ່ແຂງຕົວໂດຍການປະຕິບັດຄວາມຮ້ອນ. Instead, heat treatment is used primarily to restore ductility, relieve residual stresses, and maintain corrosion resistance, particularly after cold working or welding.
1. ການອົບແຫ້ງດ້ວຍສານລະລາຍ
ຈຸດປະສົງ:
Restore ductility after cold working
ບັນເທົາຄວາມຕຶງຄຽດທີ່ຍັງເຫຼືອ
Dissolve any chromium carbides formed during improper heating
ຂອບເຂດອຸນຫະພູມ: 1010–1120°C (1850–2050°F)
ການເຮັດໃຫ້ເຢັນ: ການດັບຄວາມຮ້ອນດ້ວຍອາກາດ ຫຼື ນ້ຳຢ່າງໄວວາເພື່ອຮັກສາໂຄງສ້າງແບບ austenitic ຢ່າງຄົບຖ້ວນ
ຜົນກະທົບ:
ສົ່ງຄືນຄຸນສົມບັດທາງກົນຈັກໃຫ້ກັບສະພາບທີ່ຖືກອົບແຫ້ງ
Maintains corrosion resistance due to low carbon content
2. ບັນເທົາຄວາມຕຶງຄຽດ
ຈຸດປະສົງ: ຫຼຸດຜ່ອນຄວາມກົດດັນທີ່ຍັງເຫຼືອຈາກການຂຶ້ນຮູບ, ການບິດງໍ ຫຼື ການເຊື່ອມໂລຫະ
ຂອບເຂດອຸນຫະພູມ: 450–650°C (840–1200°F)
ຜົນກະທົບ: Minimizes distortion and reduces the risk of stress corrosion cracking without significantly altering mechanical properties
3. ການພິຈາລະນາກ່ຽວກັບສະພາບການເຮັດວຽກເຢັນ
Cold working increases strength but decreases ductility.
ການໃຫ້ຄວາມຮ້ອນແກ່ສານລະລາຍລະດັບປານກາງ may be performed to restore formability for subsequent fabrication steps.
4. ການຮັກສາຄວາມຮ້ອນຫຼັງການເຊື່ອມ
Usually not required for corrosion resistance due to low carbon content (<0.03%).
Stress relief annealing may be applied in critical high-temperature or dimension-sensitive applications.
5. ຂໍ້ຈຳກັດ
ການປິ່ນປົວດ້ວຍຄວາມຮ້ອນ ບໍ່ເພີ່ມຄວາມແຂງຢ່າງຫຼວງຫຼາຍ; 304L relies on cold working for strengthening.
Prolonged exposure to temperatures above ~500°C may slightly reduce cold work strengthening effects.
ສະຫຼຸບ
Heat treatment of 304L stainless steel is primarily for ການບັນເທົາຄວາມກົດດັນ, ການຟື້ນຟູຄວາມຍືດຫຍຸ່ນ, ແລະ ການຮັກສາຄວາມຕ້ານທານການກັດກ່ອນ. Solution annealing and controlled stress relief ensure optimal mechanical and chemical performance, making 304L ideal for welded, cold-worked, and moderately high-temperature applications.
ການເຮັດວຽກເຢັນ
Cold Working of 304L Stainless Steel
304L stainless steel is a low-carbon austenitic stainless steel ດ້ວຍດີເລີດ cold-working characteristics. ການເຮັດວຽກເຢັນເພີ່ມຂຶ້ນ ຄວາມເຂັ້ມແຂງແລະຄວາມແຂງ through work hardening, while maintaining good corrosion resistance and ductility.
1. ພຶດຕິກຳທີ່ເນັ້ນການເຮັດວຽກໜັກ
304L work-hardens during cold deformation, increasing tensile and yield strength.
Excessive cold working reduces ductility, so intermediate annealing may be required for extensive forming.
2. ຂະບວນການເຮັດວຽກກ່ຽວກັບຄວາມເຢັນທົ່ວໄປ
ມ້ວນ: For sheets, strips, and plates
ຮູບແຕ້ມ: For wires, tubes, and rods
ການບິດງໍ ແລະ ການຂຶ້ນຮູບ: For clips, brackets, and structural components
ການປະທັບຕາ ແລະ ການແຕ້ມຮູບເລິກ: For intricate parts or industrial components
3. ການຄວບຄຸມຄຸນສົມບັດກົນຈັກ
ການເຮັດວຽກເຢັນຊ່ວຍໃຫ້ສາມາດປັບໄດ້ ຄວາມແຮງດຶງ, ຄວາມແຮງຂອງຜົນຜະລິດ, ແລະ ຄວາມແຂງ.
Extensive cold working may necessitate ການອົບແຫ້ງດ້ວຍສານລະລາຍ to restore ductility before further processing.
4. ຜົນກະທົບຕໍ່ຄວາມຕ້ານທານການກັດກ່ອນ
304L’s low carbon content prevents ການຕົກຕະກອນໂຄຣມຽມຄາໄບດ໌, maintaining corrosion resistance even after significant cold work.
Unlike standard 304, 304L is highly resistant to ການກັດກ່ອນລະຫວ່າງເມັດ ໃນພື້ນທີ່ທີ່ເຊື່ອມຫຼືເຮັດວຽກໜັກ.
5. ການພິຈາລະນາຫຼັງການສ້າງ
Solution annealing may be applied for stress relief and restoring formability if multiple cold-forming steps are required.
Cold working may induce slight ແມ່ເຫຼັກ due to minor martensitic transformation, but this is typically negligible.
6. ການນຳໃຊ້ວຽກງານເຢັນ
ສະປິງ, ຄລິບ ແລະ ຕົວຍຶດ
ອົງປະກອບໂຄງສ້າງທີ່ຕ້ອງການຄວາມແຂງແຮງສູງກວ່າ
Tubes, rods, and wire for chemical and food processing
Components requiring formability combined with corrosion resistance
ສະຫຼຸບ
304L stainless steel exhibits ຄຸນສົມບັດການເຮັດວຽກເຢັນທີ່ດີເລີດ, allowing increased strength through work hardening while maintaining corrosion resistance. Proper management of deformation and intermediate annealing ensures high-quality, durable components for industrial, chemical, food-processing, and structural applications.
