Alumínio, Liga Comercial
1050A H14 Sheet
Aluminium alloy sheet for general purpose use.
Aluminium alloy 1050 is a popular grade of aluminium for general sheet metal work where moderate strength is required.
BAIXAR PDF
Faixa
| Tamanho da folha | Espessuras |
| 2000 x 1000 | 0.5mm - 3.0mm |
| 2500 x 1250 | 0.5mm - 3.0mm |
| 3000 x 1250 | 1,0mm - 3,0mm |
| 3000 x 1500 | 1.2mm - 4.0mm |
| 4000 x 1000 | 2.0mm - 3.0mm |
| 4000 x 1250 | 2.0mm - 3.0mm |
| 4000 x 1500 | 2.0mm - 3.0mm |
| 4000 x 2000 | 2.0mm - 3.0mm |
| Some sheet can be supplied polycoated on one or two sides. | |
Stucco Sheets
| Tamanho da folha | Espessuras |
| 2000 x 1000 | 0.5mm - 0.8mm |
| 2500 x 1250 | 0.5mm - 1.2mm |
ATENÇÃO
Se você não encontrar o que procura, entre em contato com seu centro de serviço local com seus requisitos específicos.
1050A H14 Aluminium Related Specifications
| Sistema / Padrão | País / Região | Grau / Designação |
| AA | EUA | 1050A-H14 |
| UNS | Internacional | A91050 (H14) |
| PT / DIN | Europa | EN AW-1050A-H14 |
| Nome em Português | Europa | Al99.5-H14 |
| GB | China | 1050-H14 |
| JIS | Japão | A1050-H14 |
| DIN | Germany | 3.0255 (Al99.5-H14) |
| BS | Reino Unido | 1B-H14 |
| AFNOR | França | A5-H14 |
Propriedades
Composição Química
Alloy 1050A
| Elemento Químico | % Presente |
| Manganês (Mn) | 0.00 - 0.05 |
| Ferro (Fe) | 0.00 - 0.40 |
| Cobre (Cu) | 0.00 - 0.05 |
| Magnésio (Mg) | 0.00 - 0.05 |
| Silício (Si) | 0.00 - 0.25 |
| Zinco (Zn) | 0.00 - 0.07 |
| Titânio (Ti) | 0.00 - 0.05 |
| Outro (Cada) | 0.00 - 0.03 |
| Alumínio (Al) | Equilíbrio |
Propriedades Mecânicas
Sheet 0.2mm to 6.00mm
| Propriedade Mecânica | Valor |
| Resistência à Tração | 105 - 145 MPa |
| Tensão de Escoamento | 85 Min MPa |
| Dureza Brinell | 34 HB |
| Alongamento A | 12 Min % |
Propriedades Físicas Gerais
| Propriedade Física | Valor |
| Densidade | 2.71 g/cm³ |
| Ponto de Fusão | 650 °C |
| Expansão Térmica | 24 x 10-6/K |
| Módulo de Elasticidade | 71 GPa |
| Condutividade Térmica | 222 W/m.K |
| Resistividade elétrica | 0.0282 x 10-6Ω .m |
Aplicativos
- Alloy 1050 is typically used for:
- Chemical process plant equipment
- Food industry containers
- Pyrotechnic powder
- Architectural flashings
- Lamp reflectors
- Cable sheathing
- General sheet metalwork
Características
- Excelente resistência à corrosão
- High ductility
- Highly reflective finish
- Excellent weldability
- Excellent cold working properties
Informações Adicionais
Fabricação
| Processo | Avaliação |
| Trabalhabilidade - Frio | Excelente |
| Usinabilidade | Poor |
| Soldabilidade - Gás | Excelente |
| Soldabilidade - Arco | Excelente |
| Soldabilidade - Resistência | Excelente |
| Braziliabilidade | Excelente |
| Soldabilidade | Excelente |
Soldabilidade
When welding 1050 to itself or an alloy from the same subgroup the recommended filler wire is 1100. For welding to alloys 5083 and 5086 or alloys from the 7XXX series, the recommend wire is 5356. For other alloys use 4043 filler wire.