Alumínio, Liga Comercial
2014 T6511 Bar & Extrusion
A high strength aluminium alloy which retains its strength after heat treatment.
A high strength 4 to 5% copper alloy produced in extruded bar and profile form, in the fully heat-treated condition (solution heat-treated & artificially aged).
Normally stocked in the T6511 condition (stress relieved by controlled stretching) Except for sizes under 10mm diameter and over 203.2mm diameter. (T6 only). Over 203.mm diameter is manufactured to chemical composition only.
BAIXAR PDF
Faixa
| Forma do Produto | Tamanhos Imperiais | Tamanhos Métricos |
| Barra Redonda | 3⁄16"- 16" | 6mm - 50mm |
ATENÇÃO
Se você não encontrar o que procura, entre em contato com seu centro de serviço local com seus requisitos específicos.
2014 T6511 Aluminium Related Specifications
| Sistema / Padrão | País / Região | Grau / Designação |
| AA | EUA | 2014-T6511 |
| UNS | Internacional | A92014 (2014-T6511) |
| PT / DIN | Europa | EN AW-2014A / WNr 3.1255-T6511 |
| Nome em Português | Europa | AlCu4SiMg-T6511 |
| ASTM B221 | EUA | 2014-T6511 extruded bars / rods / shapes |
| GB | China | 2A14-T6511 |
| JIS | Japão | A2014-T6511 |
| Engenharia Aeroespacial | Reino Unido | L168 / HE15 (2014A bars & sections, T6511) |
| AFNOR | França | A-U4SG-T6511 |
Propriedades
Composição Química
Alloy 2014
| Elemento Químico | % Presente |
| Silício (Si) | 0.50 - 0.90 |
| Ferro (Fe) | 0.50 max |
| Cobre (Cu) | 3.90 - 5.00 |
| Zinco (Zn) | 0.25 max |
| Manganês (Mn) | 0.40 - 1.20 |
| Magnésio (Mg) | 0.20 - 0.80 |
| Titânio (Ti) | 0.15 max |
| Outros (Total) | 0.15 max |
| Cromo (Cr) | 0.10 max |
| Níquel (Ni) | 0.10 max |
| Outro (Cada) | 0.05 max |
| Titânio + zircônio (Ti+Zr) | 0.20 max |
| Alumínio (Al) | Equilíbrio |
Propriedades Mecânicas
Profile 25mm to 75mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 415 Min MPa |
| Resistência à Tração | 460 Min MPa |
| Dureza Brinell | 140 HB |
| Alongamento A | 7 Minutos % |
Profile Up to 25mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 370 Min MPa |
| Resistência à Tração | 415 Min MPa |
| Alongamento A50 mm | 5 Min % |
| Dureza Brinell | 140 HB |
| Alongamento A | 7 Minutos % |
Tube 10mm to 40mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 400 Min MPa |
| Resistência à Tração | 450 Min MPa |
| Alongamento A50 mm | 4 Min% |
| Dureza Brinell | 140 HB |
| Alongamento A | 6 Min % |
Tube Up to 10mm Wall Thickness
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 370 Min MPa |
| Resistência à Tração | 415 Min MPa |
| Dureza Brinell | 140 HB |
| Alongamento A | 7 Minutos % |
| Alongamento A50 mm | 5 Min % |
Bar 150mm to 200mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 350 Min MPa |
| Resistência à Tração | 430 Min MPa |
| Dureza Brinell | 140 HB |
| Alongamento A | 6 Min % |
Bar 75mm to 150mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 420 Min MPa |
| Resistência à Tração | 465 Min MPa |
| Dureza Brinell | 140 HB |
| Alongamento A | 7 Minutos % |
Bar 25mm to 75mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Tensão de Escoamento | 415 Min MPa |
| Resistência à Tração | 460 Min MPa |
| Dureza Brinell | 140 HB |
| Alongamento A | 7 Minutos % |
Rod & Bar Up to 25mm Dia. & A/F
| Propriedade Mecânica | Valor |
| Resistência à Tração | 415 Min MPa |
| Tensão de Escoamento | 370 Min MPa |
| Dureza Brinell | 140 HB |
| Alongamento A50 mm | 5 Min % |
| Alongamento A | 6 Min % |
Propriedades Físicas Gerais
| Propriedade Física | Valor |
| Densidade | 2.82 g/cm³ |
| Módulo de Elasticidade | 71 GPa |
| Resistividade elétrica | 0.045 x 10-6 Ω .m |
| Condutividade Térmica | 138 W/m.K |
| Expansão Térmica | 23 x 10-6/K |
| Ponto de Fusão | 535 °C |
Aplicativos
- High strength aerospace components
- Military vehicles
- Bridges
- Weapons manufacture
- Structural applications
Características
- Machinability of aluminium alloy 2014A is very good.
- Resistance to atmospheric attack is poor especially when exposed to water or salt environments. To protect against atmospheric corrosion in storage, lightly coat with lanolin based protective oil.
- Good hard anodising capability
- Good strength levels after heat treatment
Informações Adicionais
Soldabilidade
| Processo | Avaliação |
| Brazing & Soldering | Not Recommended |
| Oxygen | Not Recommended |
| Inert Gas | Not Recommended |
| Resistance, Spot, Beam | Excelente |
Surface Treatment
| Processo | Avaliação |
| Protective Anodising | Fair |
| Bright Anodising | Unsuitable |
| Hard Anodising | Bom |
| Colour Anodising | Fair (Dark colours only) |
| Plating | Muito bom |
Resistência à corrosão
- Resistance to atmospheric attack: Poor, especially when exposed to water or salt environments.
- To protect against atmospheric corrosion in storage, lightly coat with Lanolin based protective oil.