ເຫຼັກສະແຕນເລດ, ອໍສະເຕນິດ
316H Stainless Steel (S31609)
A high carbon modification of alloy 316 developed for use in elevated temperature service.
The alloy has higher strength at elevated temperatures and is used for structural and pressure vessel applications at temperatures above 932°F (500°C). The higher carbon content of 316H also delivers higher tensile and yield strength than 316/316L and its austenitic structure provides excellent toughness down to cryogenic temperatures.
316H stainless steel is a high-carbon, high-temperature variant of 316, combining enhanced tensile strength at elevated temperatures with excellent corrosion resistance. It is widely used in power generation, chemical processing, aerospace, and industrial applications where both high strength and corrosion resistance are essential.
ດາວໂຫຼດ PDF
ຂອບເຂດ
ກະລຸນາຮັບຊາບ
ຖ້າທ່ານບໍ່ເຫັນສິ່ງທີ່ທ່ານກຳລັງຊອກຫາ, ກະລຸນາຕິດຕໍ່ຫາທ່ານ ສູນບໍລິການທ້ອງຖິ່ນ ກັບຄວາມຕ້ອງການສະເພາະຂອງທ່ານ.
316H Stainless Steel Related Specifications
| ລະບົບ / ມາດຕະຖານ | ປະເທດ / ພາກພື້ນ | ຊັ້ນ / ຕຳແໜ່ງ |
| AISI | ສະຫະລັດອາເມລິກາ | 316H |
| ສະຫະປະຊາຊາດ | ສາກົນ | S31609 |
| EN / W.Nr. | ເອີຣົບ | 1.4401 (316 base grade) |
| ຊື່ EN | ເອີຣົບ | X5CrNiMo17-12-2 |
| ASTM A240 | ສະຫະລັດອາເມລິກາ | Type 316H (plate, sheet) |
| ASTM A182 | ສະຫະລັດອາເມລິກາ | F316H (forgings, flanges) |
| ASTM A213 | ສະຫະລັດອາເມລິກາ | TP316H (boiler & heat-exchanger tubes) |
| ASTM A312 | ສະຫະລັດອາເມລິກາ | TP316H (seamless pipe) |
| GB | ຈີນ | 07Cr17Ni12Mo2 |
| ຈີໄອເອສ | ຍີ່ປຸ່ນ | SUS316H |
| ບີເອສ | ອັງກິດ | 316H |
| AFNOR | ປະເທດຝຣັ່ງ | Z10CNS17-13 (approx. 316H type) |
ຊັບສິນ
ສ່ວນປະກອບທາງເຄມີ
316H Stainless Steel Bar
EN 10269:2013
| ທາດເຄມີ | % ປັດຈຸບັນ |
| ຄາບອນ (C) | 0.04 - 0.08 |
| ໂຄຣມຽມ (Cr) | 16.50 - 18.50 |
| ໂມລິບດີນຳ (ໂມ) | 2.00 - 2.50 |
| ຊິລິໂຄນ (Si) | 0.00 - 1.00 |
| ຟອສຟໍຣັດ (P) | 0.00 - 0.04 |
| ຊູນຟູຣິກ (S) | 0.00 - 0.02 |
| ນິກເກີນ (Ni) | 10.00 - 13.00 |
| ແມງການີສ (Mn) | 0.00 - 2.00 |
| ໄນໂຕຣເຈນ (N) | 0.00 - 0.10 |
| ທາດເຫຼັກ (Fe) | ຍອດເງິນ |
ຄຸນສົມບັດທາງກົນຈັກ
316H Stainless Steel Bar Up to 160mm
EN 10269:2013
| ຊັບສິນທາງກົນຈັກ | ມູນຄ່າ |
| ຫຼັກຖານຄວາມກົດດັນ | 205 ມິນລິແມັດຕໍ່ຊົ່ວໂມງ |
| ຄວາມຕ້ານທານແຮງດຶງ | 490 to 690 MPa |
| ການຍືດຕົວ A50 ມມ | 35 % |
ຄຸນສົມບັດທາງກາຍະພາບທົ່ວໄປ
| ຊັບສິນທາງກາຍະພາບ | ມູນຄ່າ |
| ຄວາມໜາແໜ້ນ | 8.00 g/cm³ |
| ຈຸດລະລາຍ | 1400 °C |
| ການຂະຫຍາຍຕົວທາງຄວາມຮ້ອນ | 15.9 x 10-6/K |
| ໂມດູນຄວາມຍືດຫຍຸ່ນ | 193 ເກຣດສະເລ່ຍ |
| ການນຳຄວາມຮ້ອນ | 16.3 W/m.K |
| ຄວາມຕ້ານທານໄຟຟ້າ | 0.74 x 10-6 Ω .m |
Applications of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel ອອກແບບມາສຳລັບ ການນຳໃຊ້ອຸນຫະພູມສູງ where ຄວາມເຂັ້ມແຂງ ແລະ ຄວາມຕ້ານທານການກັດກ່ອນ are critical. Its high carbon content gives it superior tensile strength at elevated temperatures, making it ideal for welded and high-stress components.
1. Power Generation
Boilers, superheaters, and steam piping in power plants
Pressure vessels and heat exchangers exposed to high-temperature steam
Components that require high creep and tensile strength
2. ອຸດສາຫະກຳເຄມີ ແລະ ປິໂຕຣເຄມີ
Reactors, vessels, and piping handling corrosive or high-temperature chemicals
Heat exchangers and condensers operating under elevated temperature conditions
Equipment exposed to oxidizing and mildly reducing environments
3. Aerospace and High-Temperature Engineering
Exhaust systems, turbocharger components, and high-temperature welded assemblies
Applications where both strength and corrosion resistance at high temperatures are essential
4. ການປຸງແຕ່ງອາຫານ ແລະ ຢາ
High-temperature sterilization equipment
Heat exchangers and vessels in hygienic applications where corrosion resistance is crucial
5. Marine and Offshore Applications
ສ່ວນປະກອບທີ່ສຳຜັດກັບ elevated-temperature seawater or coastal atmospheres
Pump shafts, valves, and fittings where high strength is needed under corrosion exposure
ສະຫຼຸບ
316H stainless steel is widely used in high-temperature industrial, chemical, marine, aerospace, and food-processing applications. ມັນ high carbon content and excellent corrosion resistance make it suitable for pressure vessels, boilers, piping, heat exchangers, and welded assemblies operating under demanding conditions.
Characteristics of 316H Stainless Steel
316H stainless steel is a high-carbon, austenitic stainless steel ອອກແບບມາສຳລັບ high-temperature service. It retains the excellent corrosion resistance of standard 316 stainless steel while offering enhanced tensile strength at elevated temperatures due to its higher carbon content.
1. High-Temperature Strength
Increased carbon content (typically 0.04–0.10%) provides higher tensile and creep strength than 316 or 316L at elevated temperatures.
Suitable for continuous service at temperatures up to ~800°C (1470°F).
ຮັກສາໄວ້ mechanical integrity under high thermal stress.
2. ຄວາມຕ້ານທານການກັດກ່ອນ
ຄວາມຕ້ານທານທີ່ດີເລີດຕໍ່ກັບ general corrosion, oxidation, and mildly reducing chemicals.
ປະຕິບັດໄດ້ດີໃນ ສະພາບແວດລ້ອມອົກຊີເຈນ such as atmospheric, chemical, and marine conditions.
Retains corrosion resistance after welding, although stress relief may be recommended for high-temperature applications.
3. ຄຸນສົມບັດທາງກົນຈັກ
High tensile strength and yield strength compared to standard 316 stainless steel.
ດີ ຄວາມຍືດຫຍຸ່ນ ແລະ ຄວາມແຂງກະດ້າງ, ເຖິງແມ່ນວ່າຢູ່ໃນອຸນຫະພູມສູງ.
Cold working improves strength further but reduces ductility.
4. Fabrication and Weldability
Weldable using TIG, MIG, and SMAW processes.
Stress relief after welding is sometimes recommended to minimize thermal stresses in high-temperature applications.
ສາມາດເປັນໄດ້ hot- or cold-worked with proper process controls.
5. Applications Leveraging Characteristics
High-temperature pressure vessels, boilers, and piping
Chemical and petrochemical reactors and heat exchangers
Aerospace and high-temperature industrial components
Food and pharmaceutical equipment requiring both corrosion resistance and high-temperature strength
ສະຫຼຸບ
316H stainless steel combines the high-temperature strength of a high-carbon austenitic steel with the excellent corrosion resistance of 316 stainless steel. It is particularly suited for pressure vessels, high-temperature piping, chemical equipment, and welded assemblies operating under demanding thermal and corrosive environments.
ຂໍ້ມູນເພີ່ມເຕີມ
ຄວາມສາມາດໃນການເຊື່ອມ
Weldability of 316H Stainless Steel
316H stainless steel, a high-carbon austenitic stainless steel, is generally weldable using conventional methods, though care must be taken due to its ປະລິມານຄາບອນສູງຂຶ້ນ, which can increase the risk of sensitization and intergranular corrosion ໃນເຂດທີ່ໄດ້ຮັບຜົນກະທົບຈາກຄວາມຮ້ອນ.
1. Suitable Welding Methods
TIG (GTAW): Ideal for precise welds and thin sections
MIG (GMAW): Suitable for thicker sections and industrial applications
SMAW (Stick Welding): Common for maintenance and field welding
ການເຊື່ອມໂລຫະຕ້ານທານ: ການເຊື່ອມໂລຫະແບບຈຸດ ແລະ ແບບຕໍ່ເນື່ອງສຳລັບການນຳໃຊ້ແຜ່ນໂລຫະ
2. Considerations Due to High Carbon
Higher carbon content increases the risk of ການຕົກຕະກອນໂຄຣມຽມຄາໄບດ໌ during welding.
Post-weld solution annealing or stress relief is recommended for high-temperature service to maintain corrosion resistance and mechanical properties.
ໃຊ້ matching or slightly higher alloy filler metals (ER316 or ER316H) to reduce sensitization risk.
3. Heat Input and Distortion Control
Austenitic stainless steels expand more than carbon steels during welding.
ໃຊ້ moderate heat input and proper welding sequence to minimize distortion and residual stresses.
Avoid prolonged welding in one area to reduce localized sensitization.
4. Applications Leveraging Weldability
High-temperature piping, boilers, and pressure vessels
Chemical processing reactors and heat exchangers
Aerospace and power generation components
ອຸປະກອນປຸງແຕ່ງອາຫານ ແລະ ຢາ
ສະຫຼຸບ
316H stainless steel is weldable with standard techniques, but the high carbon content requires careful attention to heat input, filler selection, and post-weld treatment. When properly welded, it maintains high-temperature strength, corrosion resistance, and structural integrity, ເຮັດໃຫ້ມັນເໝາະສົມກັບ pressure vessels, chemical, and high-temperature applications.
ການຜະລິດ
Fabrication of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel ອອກແບບມາສຳລັບ ການນຳໃຊ້ອຸນຫະພູມສູງ. Its fabrication combines standard austenitic stainless steel techniques with special considerations due to the elevated carbon content, which affects weldability, work hardening, and heat treatment.
1. ການຂຶ້ນຮູບ
ການຂຶ້ນຮູບເຢັນ:
ເໝາະສົມສຳລັບ bending, rolling, deep drawing, and stamping
Work hardens moderately; extensive deformation may require intermediate solution annealing to restore ductility
ການຂຶ້ນຮູບຮ້ອນ:
Recommended for thicker sections or complex shapes
ຂອບເຂດປົກກະຕິ: 1010–1175°C (1850–2150°F)
ຜະລິດ uniform mechanical properties and reduces work hardening
2. ການຕັດ ແລະ ການຕັດ
Can be cut with ວິທີການເລເຊີ, ນ້ຳຢາສີດ, ພລາສມາ ຫຼື ກົນຈັກ
Sharp tools and proper feeds minimize work hardening and surface defects
3. ເຄື່ອງຈັກ
Moderate machinability due to ຄວາມແຂງແກ່ນ ແລະ ແນວໂນ້ມການເຮັດວຽກໜັກ
ເຄື່ອງມືຄາໄບດ໌ preferred for heavy-duty or high-speed operations
Coolants and lubricants reduce heat, improve surface finish, and extend tool life
4. ການເຊື່ອມໂລຫະ
Can be welded using TIG, MIG, SMAW, and resistance welding
Higher carbon content increases risk of ການເຮັດໃຫ້ຮູ້ສຶກໄວ, so post-weld solution annealing or stress relief may be needed for high-temperature service
ໃຊ້ matching or slightly higher alloy filler metals (ER316H) for optimal corrosion resistance
5. ການເຮັດວຽກເຢັນ ແລະ ຮ້ອນ
ການເຮັດວຽກເຢັນ increases strength via work hardening but decreases ductility
ການເຮັດວຽກຮ້ອນ (forging, rolling) restores ductility and produces uniform grain structure
Proper process planning ensures both mechanical performance and corrosion resistance
6. ການສຳເລັດຮູບພື້ນຜິວ
Standard finishes: 2B, BA, or polished
Post-fabrication pickling or passivation may be applied to restore surface corrosion resistance
7. ການນຳໃຊ້ຜະລິດຕະພັນທີ່ນຳໃຊ້ການຜະລິດ
High-temperature pressure vessels, boilers, and piping
Chemical reactors and heat exchangers
Aerospace and industrial high-temperature components
Food and pharmaceutical equipment requiring high strength and corrosion resistance
ສະຫຼຸບ
316H stainless steel can be fabricated using standard forming, machining, and welding methods, but its high carbon content requires careful handling to prevent sensitization and maintain corrosion resistance. Proper hot/cold working, welding procedures, and heat treatment make it ideal for high-temperature and demanding industrial applications.
ການເຮັດວຽກຮ້ອນ
Hot Working of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel ອອກແບບມາສຳລັບ ການນຳໃຊ້ອຸນຫະພູມສູງ. Hot working is used to form or shape thick or complex components while maintaining mechanical strength and corrosion resistance.
1. ອຸນຫະພູມເຮັດວຽກທີ່ແນະນຳໃຫ້ໃຊ້ຮ້ອນ
Typical temperature range: 1010–1175°C (1850–2150°F)
Above this range, ການເຕີບໃຫຍ່ຂອງເມັດພືດ may occur, reducing toughness
Below this range, flow stress increases, making forming more difficult
2. ຂະບວນການເຮັດວຽກຮ້ອນທີ່ເໝາະສົມ
ມ້ວນຮ້ອນ: Plates, sheets, and structural components
ການຕີເຫຼັກຮ້ອນ: ຊິ້ນສ່ວນທີ່ມີຄວາມແຂງແຮງສູງ ຫຼື ມີຮູບຮ່າງທີ່ສັບສົນ
ການອັດຮ້ອນ: ເຫຼັກ, ທໍ່ ແລະ ໂປຣໄຟລ໌
ການກົດ/ການຂຶ້ນຮູບດ້ວຍຄວາມຮ້ອນ: Thick or large components that cannot be cold-worked
3. ຂໍ້ດີຂອງການເຮັດວຽກຮ້ອນ
ຫຼຸດຜ່ອນ ການແຂງຕົວຂອງວຽກ ເມື່ອທຽບກັບການເຮັດວຽກເຢັນ
Improves ຄວາມຍືດຫຍຸ່ນ ແລະ ຄວາມແຂງກະດ້າງ
ຜະລິດ uniform grain structure and mechanical properties
Enables fabrication of ອົງປະກອບຂະໜາດໃຫຍ່ ຫຼື ສະລັບສັບຊ້ອນ
4. ການປິ່ນປົວຫຼັງຈາກເຮັດວຽກຮ້ອນ
ການອົບແຫ້ງດ້ວຍສານລະລາຍ ອາດຈະຖືກນໍາໃຊ້ເພື່ອບັນເທົາຄວາມກົດດັນທີ່ຍັງເຫຼືອ ແລະ ຟື້ນຟູຄວາມຍືດຫຍຸ່ນ
ການດອງ ຫຼື ການເຮັດໃຫ້ຊຸ່ມ enhances surface corrosion resistance if needed
5. ຄໍາຮ້ອງສະຫມັກທີ່ນໍາໃຊ້ການເຮັດວຽກຮ້ອນ
Pressure vessels, boilers, and piping in power plants
Heat exchangers and chemical reactors
Aerospace and industrial components subjected to high temperatures and stress
ສະຫຼຸບ
316H stainless steel exhibits ການເຮັດວຽກຮ້ອນດີເລີດ, allowing shaping and forming at 1010–1175°C. Hot working improves ductility, toughness, and uniform mechanical properties while preserving corrosion resistance, making it ideal for pressure vessels, chemical, high-temperature, and industrial applications.
ຄວາມຕ້ານທານຄວາມຮ້ອນ
Heat Resistance of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel ອອກແບບມາສຳລັບ ການນຳໃຊ້ອຸນຫະພູມສູງ. Its increased carbon content provides enhanced tensile strength at elevated temperatures, ເຮັດໃຫ້ມັນເໝາະສົມກັບ pressure vessels, boilers, and high-temperature piping.
1. ອຸນຫະພູມການບໍລິການຢ່າງຕໍ່ເນື່ອງ
ເໝາະສົມສຳລັບ continuous operation up to ~800°C (1470°F)
ຮັກສາໄວ້ mechanical properties, tensile strength, and creep resistance at elevated temperatures
Prolonged exposure above this temperature may slightly reduce ductility or cause surface scaling
2. Intermittent or Cyclic Exposure
ສາມາດທົນໄດ້ short-term exposures above 800°C ໂດຍບໍ່ມີການເຊື່ອມໂຊມຂອງພື້ນຜິວທີ່ສຳຄັນ
ເໝາະສົມສຳລັບ thermal cycling applications in industrial and power generation equipment
3. ຄວາມຕ້ານທານການຜຸພັງ
ປະກອບເປັນ ຊັ້ນປ້ອງກັນໂຄຣມຽມອອກໄຊ that resists oxidation and scaling
ປະຕິບັດໄດ້ດີໃນ industrial furnaces, boilers, and heat exchangers
Not suitable for strongly sulfidizing or highly oxidizing atmospheres at extreme temperatures
4. Mechanical Properties at High Temperature
ຮັກສາໄວ້ tensile strength, creep resistance, and ductility
Hot-worked or cold-worked areas maintain good mechanical stability after proper heat treatment
Grain growth can occur if exposed to excessive heat without ການອົບແຫ້ງດ້ວຍສານລະລາຍ
5. Applications Leveraging Heat Resistance
High-temperature pressure vessels and boiler components
Chemical and petrochemical reactors and heat exchangers
Aerospace components exposed to elevated temperatures
Food and pharmaceutical processing equipment requiring high-temperature service
ສະຫຼຸບ
316H stainless steel offers ປະສິດທິພາບອຸນຫະພູມສູງທີ່ດີເລີດ, with continuous service up to ~800°C. Its high carbon content ensures superior tensile strength and creep resistance, while maintaining corrosion resistance in welded and high-temperature applications, making it ideal for power generation, chemical, industrial, and aerospace environments.
ຄວາມສາມາດໃນການປຸງແຕ່ງ
Machinability of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel ທີ່ສະແດງໃຫ້ເຫັນ ຄວາມສາມາດໃນການປຸງແຕ່ງປານກາງ. Its toughness, work-hardening tendency, and relatively low thermal conductivity require careful tool selection, cutting speeds, and lubrication to achieve efficient machining with good surface finish.
1. ພຶດຕິກຳທີ່ເນັ້ນການເຮັດວຽກໜັກ
316H work-hardens rapidly during machining
Hardened surfaces increase cutting forces and accelerate tool wear
Smooth, continuous cutting reduces localized work hardening
2. ຄໍາແນະນໍາກ່ຽວກັບເຄື່ອງມື
ເຄື່ອງມືຄາໄບດ໌ are preferred for high-speed or heavy-duty machining
ເຄື່ອງມືເຫຼັກກ້າຄວາມໄວສູງ (HSS) can be used for lighter cuts or slower operations
Positive rake angles help reduce cutting forces and improve surface finish
3. ຄວາມໄວໃນການຕັດ ແລະ ອັດຕາປ້ອນ
ໃຊ້ slower cutting speeds compared with carbon steels
Moderate to heavy feeds maintain continuous chip flow and prevent hard spots
Avoid stopping or dwelling on the workpiece to prevent localized work hardening
4. ການເຮັດຄວາມເຢັນ ແລະ ການຫລໍ່ລື່ນ
ໃຊ້ flood coolant or cutting fluid to minimize heat buildup
High-pressure lubrication helps evacuate chips efficiently
ຫຼຸດຜ່ອນ tool wear and improves surface finish
5. ການສ້າງຊິບ
ຊິບແມ່ນ tough, stringy, and sticky
ໃຊ້ chip breakers or controlled feeds to manage chip formation
6. ການສຳເລັດຮູບພື້ນຜິວ
Achievable with sharp tools, proper feeds, and adequate cooling
ພື້ນທີ່ທີ່ເຮັດວຽກໜັກອາດຈະຕ້ອງການ ການຜ່ານເຂົ້າເສັ້ນໄຊ for a smooth surface
ສະຫຼຸບ
316H stainless steel has ຄວາມສາມາດໃນການປຸງແຕ່ງປານກາງ, requiring careful tool selection, cutting parameters, and cooling. Proper machining ensures high-precision components with good surface finish and durability, suitable for high-temperature, chemical, marine, and industrial applications.
ຄວາມຕ້ານທານການກັດກ່ອນ
Corrosion Resistance of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel ອອກແບບມາສຳລັບ high-temperature and corrosive environments. Its composition provides excellent general corrosion resistance while maintaining strength at elevated temperatures.
1. ຄວາມຕ້ານທານການກັດກ່ອນທົ່ວໄປ
ທົນທານຕໍ່ oxidation, atmospheric corrosion, and mildly corrosive chemicals
ປະຕິບັດໄດ້ດີໃນ industrial, marine, and chemical environments
Maintains corrosion resistance even after welding or high-temperature service
2. Intergranular Corrosion
The higher carbon content slightly increases sensitization risk during welding
Post-weld solution annealing or stress-relief minimizes the risk of ການກັດກ່ອນລະຫວ່າງເມັດ
Suitable for welded components with proper heat treatment
3. Pitting and Crevice Corrosion
Exhibits good resistance to chloride-induced corrosion
Better than 304/304L but slightly less than 316L in severe chloride conditions
ເໝາະສົມສຳລັບ marine, coastal, and mildly aggressive chemical environments
4. ການກັດກ່ອນໃນອຸນຫະພູມສູງ
ທົນທານຕໍ່ ອົກຊີເດຊັນ ແລະ ການຂູດ at elevated temperatures (continuous service up to ~800°C)
ປະຕິບັດໄດ້ດີໃນ steam, hot gases, and chemical processing environments
Not suitable for strongly sulfidizing or highly oxidizing atmospheres at extreme temperatures
5. ຄໍາຮ້ອງສະຫມັກທີ່ນໍາໃຊ້ຄວາມຕ້ານທານການກັດກ່ອນ
High-temperature pressure vessels, boilers, and piping
Chemical reactors, heat exchangers, and condensers
Marine components exposed to elevated temperatures
ອຸປະກອນປຸງແຕ່ງອາຫານ ແລະ ຢາ
ສະຫຼຸບ
316H stainless steel combines excellent high-temperature strength ດ້ວຍ ທົນທານຕໍ່ການກັດກ່ອນທີ່ດີ, ໂດຍສະເພາະໃນ welded and industrial applications. Proper post-weld heat treatment ensures durability, making it ideal for power generation, chemical, marine, and industrial applications.
ການປິ່ນປົວດ້ວຍຄວາມຮ້ອນ
Heat Treatment of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel. Like other austenitic stainless steels, it is not hardenable by conventional heat treatment. ການປິ່ນປົວດ້ວຍຄວາມຮ້ອນສ່ວນໃຫຍ່ແມ່ນໃຊ້ເພື່ອ ບັນເທົາຄວາມກົດດັນ, ຟື້ນຟູຄວາມຍືດຫຍຸ່ນ, ແລະຮັກສາຄວາມຕ້ານທານການກັດກ່ອນ,, particularly after welding or cold working.
1. ການອົບແຫ້ງດ້ວຍສານລະລາຍ
ຈຸດປະສົງ:
ຟື້ນຟູຄວາມຍືດຫຍຸ່ນຫຼັງຈາກການເຮັດວຽກເຢັນຫຼືການຂຶ້ນຮູບ
ບັນເທົາຄວາມຕຶງຄຽດທີ່ຍັງເຫຼືອ
Dissolve any undesired chromium carbides formed during high-temperature exposure
ຂອບເຂດອຸນຫະພູມ: 1010–1120°C (1850–2050°F)
ການເຮັດໃຫ້ເຢັນ: Rapid air or water quench to preserve austenitic structure
ຜົນກະທົບ:
Restores mechanical properties
Maintains corrosion resistance due to titanium or high-carbon stabilization
2. Stress Relief Annealing
ຈຸດປະສົງ: ຫຼຸດຜ່ອນຄວາມກົດດັນທີ່ຍັງເຫຼືອຈາກການຂຶ້ນຮູບ, ການບິດງໍ ຫຼື ການເຊື່ອມໂລຫະ
ຂອບເຂດອຸນຫະພູມ: 450–650°C (840–1200°F)
ຜົນກະທົບ:
Minimizes distortion
Reduces risk of stress corrosion cracking without significantly altering mechanical properties
3. Post-Weld Heat Treatment
Generally recommended for high-temperature service applications
Relieves welding-induced stresses and reduces risk of sensitization
Helps maintain mechanical strength and corrosion resistance
4. Cold-Worked Condition Considerations
ການເຮັດວຽກເຢັນເພີ່ມຄວາມແຂງແຮງແຕ່ຫຼຸດຜ່ອນຄວາມຍືດຫຍຸ່ນ
Intermediate solution annealing may be applied to restore formability for further fabrication
5. ຂໍ້ຈຳກັດ
Heat treatment does not significantly increase hardness
Excessive exposure at elevated temperatures may reduce cold-work strengthening effects slightly
ສະຫຼຸບ
Heat treatment of 316H stainless steel is primarily for ການບັນເທົາຄວາມກົດດັນ, ການຟື້ນຟູຄວາມຍືດຫຍຸ່ນ, ແລະ ການຮັກສາຄວາມຕ້ານທານການກັດກ່ອນ. Proper solution annealing and stress relief ensure optimal mechanical properties for pressure vessels, boilers, chemical equipment, and high-temperature applications.
ການເຮັດວຽກເຢັນ
Cold Working of 316H Stainless Steel
316H stainless steel is a high-carbon austenitic stainless steel ດ້ວຍ good cold-working characteristics. ການເຮັດວຽກເຢັນເພີ່ມຂຶ້ນ ຄວາມເຂັ້ມແຂງແລະຄວາມແຂງ through work hardening while maintaining good corrosion resistance and ductility, provided it is managed carefully.
1. ພຶດຕິກຳທີ່ເນັ້ນການເຮັດວຽກໜັກ
316H stainless steel work-hardens moderately to rapidly ໃນລະຫວ່າງການຜິດປົກກະຕິຂອງຄວາມເຢັນ.
ຄວາມແຂງແຮງ ແລະ ຄວາມແຂງເພີ່ມຂຶ້ນ, ໃນຂະນະທີ່ຄວາມຍືດຫຍຸ່ນຫຼຸດລົງເມື່ອການຜິດຮູບເກີດຂຶ້ນ.
Extensive cold working may require ການອົບແຫ້ງດ້ວຍສານລະລາຍ to restore ductility before further fabrication.
2. Cold Working Processes
ມ້ວນ: ແຜ່ນ, ແຖບ ແລະ ແຜ່ນ
ຮູບແຕ້ມ: ທໍ່, ເຫຼັກ, ແລະ ສາຍໄຟ
ການບິດງໍ ແລະ ການຂຶ້ນຮູບ: ສ່ວນປະກອບໂຄງສ້າງ, ວົງເລັບ ແລະ ຄລິບ
ການປະທັບຕາ ແລະ ການແຕ້ມຮູບເລິກ: Industrial, food-processing, and chemical equipment components
3. Mechanical Property Control
ການເຮັດວຽກເຢັນຊ່ວຍໃຫ້ສາມາດປັບໄດ້ ຄວາມແຮງດຶງ, ຄວາມແຮງຂອງຜົນຜະລິດ, ແລະ ຄວາມແຂງ.
Intermediate solution annealing can restore ductility for further forming operations.
4. ຜົນກະທົບຕໍ່ຄວາມຕ້ານທານການກັດກ່ອນ
High carbon content slightly increases sensitization risk, but proper stress relief or solution annealing after cold work preserves intergranular corrosion resistance.
Suitable for components exposed to chemical, marine, or high-temperature environments.
5. ການພິຈາລະນາຫຼັງການສ້າງ
Solution annealing may be applied to relieve stresses and restore ductility if multiple cold-working steps are planned.
Cold working may induce slight magnetism due to minor strain-induced martensite formation.
6. ການນຳໃຊ້ວຽກງານເຢັນ
Springs, clips, and fasteners requiring higher strength
Structural components with both ຄວາມເຂັ້ມແຂງ ແລະ ຄວາມຕ້ານທານການກັດກ່ອນ
Tubes, rods, and wires for chemical, marine, and high-temperature equipment
Formed components for food, pharmaceutical, and industrial applications
ສະຫຼຸບ
316H stainless steel exhibits ຄຸນສົມບັດການເຮັດວຽກເຢັນທີ່ດີເລີດ, allowing increased strength through work hardening while preserving corrosion resistance. Proper management of deformation and heat treatment ensures durable, high-performance components suitable for pressure vessels, chemical, marine, and high-temperature applications.
